[chirp_users] cable for kenwood th-f7

[Amnon Zohar]

Easier but you need to make sure the prolitic driver is not updated from
ver 3,2,0,0! Building a cable solves the issue
בתאריך 25 בינו' 2016 2:44 AM,‏ "W2ZDP via chirp_users" <
chirp_users at intrepid.danplanet.com> כתב:

> Thanks for the tip, sounds much easier !!
>
>
>
>
> -----Original Message-----
> From: IW2GJV via chirp_users <chirp_users at intrepid.danplanet.com>
> To: chirp_users <chirp_users at intrepid.danplanet.com>
> Sent: Sun, Jan 24, 2016 3:09 pm
> Subject: Re: [chirp_users] cable for kenwood th-f7
>
>
>
>
>
>
> Has anyone built an interface for an Icom IC-T7H, I've had one for years and
>
> programming it from the key pad is OK, just thought there might be something
>
> even easier
>
>
>
> W2ZDP
>
>
>
>
>
> why built a cable, i used the low cost cable for BAOFENG, work well, used the
>
> original kenwood program or CHIRP .
>
> i used this cable into the kenwood th-f7
>
>
>
> bst 73 de Rudy - IW2BSF
>
>
>
> _______________________________________________
>
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160125/3c00a7c2/attachment.html