[chirp_users] cable for kenwood th-f7

[Amnon Zohar]

i built a cable for my baofeng radio to avoid the annoying need to
downgrade the driver for win7 and win10/
the new prolitic driver that is installed automatically is not compatible
with clone prolitic chip
driver 3.6.*.* should be downgraded to ver 3.2.0.0 to make the cheap cable
work
usb board was bought on aliexpress for 0.57$ free shipping

2016-01-24 22:08 GMT+02:00 IW2GJV via chirp_users <
chirp_users at intrepid.danplanet.com>:

>
> Has anyone built an interface for an Icom IC-T7H, I've had one for years
> and
> programming it from the key pad is OK, just thought there might be
> something
> even easier
>
> W2ZDP
>
>
> why built a cable, i used the low cost cable for BAOFENG, work well, used
> the
> original kenwood program or CHIRP .
> i used this cable into the kenwood th-f7
>
> bst 73 de Rudy - IW2BSF
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>



-- 
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160125/800ac2f9/attachment.html