[chirp_users] Radio did not respond error

[Jardy Dawson]

If Device Manager shows your cable to be Prolific, roll your driver back to 3.2.0.0.  Also make sure cable is FIRMLY oushed in to the radio.

Jardy Dawson
WA7JRD Ham Radio

Message relayed through The Senior Boston Relay Race baton pass.

On Aug 27, 2016, at 10:39, Paul Harris via chirp_users <chirp_users at intrepid.danplanet.com> wrote:

Baofeng UV-5X3
Cable PCO3 
Had to get drivers to get to this stage but radio does not respond.  Do the red and green lights on cable  usb end have to remain on or just flash on when you plug in. Computers is a HP windows 7.
Paul KB2VEC
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72 at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160827/c61ecfd9/attachment.html