[chirp_users] ID-880H

[Jardy]

If your cable shows to be a Prolific, roll your driver back to 3.2.0.0.

Jardy Dawson WA7JRD
Sent from the Death Star for Darth Vader's eyes only. Any other reception will be severely punished. 💀

> On Aug 23, 2016, at 17:49, Glenn <glennervin at cableone.net> wrote:
> 
> Well, maybe it was just a problem for my cable, but it stated windows in 
> general.
> I think it said that windows would find a driver, but it will find the wrong 
> one.
> It identifies the cable, but it will not work right.
> Glenn
> ----- Original Message ----- 
> From: "Patrick Lang" <stickpatrick at gmail.com>
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
> Sent: Tuesday, August 23, 2016 7:43 PM
> Subject: Re: [chirp_users] ID-880H
> 
> 
> What version of Windows?
> 
> 8 and 10 automatically found the driver on my valley cable
> 
> Sent from a tiny keyboard
> 
>> On Aug 23, 2016, at 8:14 PM, Glenn <glennervin at cableone.net> wrote:
>> 
>> Dick,
>> If you are using Windows, you need to install the driver before ever
>> plugging in the cable, or you will have problems.
>> In that instance, if it was plugged into windows without installing the
>> driver first, you may need to remove it from device manager, and install 
>> the
>> windows driver, and then plug it in again.
>> I think Linux does not need a driver installed.
>> Glenn
>> ----- Original Message ----- 
>> From: "Dick Smith" <w4rss at radioclub.org>
>> To: <chirp_users at intrepid.danplanet.com>
>> Sent: Tuesday, August 23, 2016 9:01 AM
>> Subject: [chirp_users] ID-880H
>> 
>> 
>> I received the programming cable from Valley Ent.  Plugged it in to the
>> pc and to the 880h, but Chirp does not see it.  I downloaded the Icom
>> clonging software and it works perfectly.
>> 
>> Any thoughts?
>> 
>> Dick
>> W4RSS
>> 
>> 
>> 
>> 
>> --------------------------------------------------------------------------------
>> 
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin at cableone.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Patrick Lang at stickpatrick at gmail.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com