[chirp_users] Kenwood TK-762H

[Jon S]

anyone know why when i try to program my 857d that i get an error message
when cloning?

On Wed, Aug 10, 2016 at 6:58 PM, Pavel Milanes (CO7WT) <pavelmc at gmail.com>
wrote:

> Hi Tim, (I was off the grid by family vacations)
>
> If the lights are off you have 90% chance of not having power to the
> interface, but, if you use a USB interface it may work... I have to check
> in the schematics but I'm pretty sure it will work with a USB programmer.
>
> 73 Pavel CO7WT
>
>
> El 08/08/16 a las 11:35, Tim Billingsley escribió:
>
> I will check that as time allows and I bet you are correct asI do not
> believe any of these old men light up any longer. I will advise as time
> allows.
>
> 73
>
> On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) <pavelmc at gmail.com>
> wrote:
>
>> Hi Tim, sorry to hear about your heard issues.
>>
>> Can you please confirms that the cable interface is working? (it looks to
>> me as a interface problem)
>>
>> Also, your radios has the LCD backlight on?
>>
>> There is a know issue with this radios about this: usually the kenwood
>> interface for this radios take power from the radio not from the PC, and
>> the power is taken from the same rail the LCD leds are powered.
>>
>> For some reason with time (or a mic cable short) a medium power resistor
>> burn out in the main board and get the front panel without +12V, that not a
>> problem to the normal operation as it works on +5v, but the backlight gone
>> off and the programmer has no power to feed from and always fails to
>> operate.
>>
>> Can you check that please?
>> 73.
>>
>> El 22/07/16 a las 09:32, Tim Billingsley escribió:
>>
>> I apologize for the long delay.    With health issues and an amount of
>> tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H
>> none worked. The CHIRP options of TK-760G & TK-762G appears to read from
>> the radio then throws the error
>>
>>
>> ERROR: Traceback (most recent call last):
>>
>>     self.__radio.sync_in()
>>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
>> 410, in sync_in
>>     self._mmap = do_download(self)
>>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
>> 254, in do_download
>>     open_radio(radio)
>>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
>> 226, in open_radio
>>     raise errors.RadioError(msg)
>> RadioError: Radio refuse to enter into program mode after a few tries
>>
>> ERROR: ----------------
>> ERROR: Clone failed: Radio refuse to enter into program mode after a few
>> tries
>> ERROR: --- Exception Dialog: Radio refuse to enter into program mode
>> after a few tries ---
>> ERROR: None
>>
>> ERROR: ----------------------------
>>
>>
>>
>>
>>
>> --
>> 73 Pavel CO7WT.
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Tim at kd5ckp at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to M.Sc. Pavel Milanes Costa at pavelmc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> --
> 73 Pavel CO7WT.
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jon at savageman208 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160811/4f57762d/attachment.html