[chirp_users] removel of Plan

[Jim Unroe]

On Tue, Aug 9, 2016 at 4:09 AM,  <bernard.dowley at sky.com> wrote:
>  Hi
>
> Using Chirp with either a Baofeng UV-5R or Intek KT 980HP is it possible to
> remove the 2 metre and 70 centimetre facility so that only the user
> programmed frequencies are available for use.
>
> Any help appreciated
>
> Regards
>
> Bernie
> Bernard Dowley

Hi Bernie,

If you are looking to disable either to both bands in the VFOs so the
user cannot program memory channels, this is easy. Just program either
or both lower band limits with a value that is higher than the upper
band limit (I usually just swap them). This makes it impossible to
enter a frequency into the VFO and therefor makes it impossible to
program any channels using menu 27 (MEM-CH).

Just be aware the radio user can still use menu 40 (RESET) to erase
all of the channels leaving the factory channels 0 and 127, but no
other channels can be programmed.

Jim KC9HI