[chirp_users] Kenwood TK-762H

[Tim Billingsley]

On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) <pavelmc at gmail.com>
wrote:
>
>
> There is a know issue with this radios about this: usually the kenwood
> interface for this radios take power from the radio not from the PC, and
> the power is taken from the same rail the LCD leds are powered.
>
> For some reason with time (or a mic cable short) a medium power resistor
> burn out in the main board and get the front panel without +12V, that not a
> problem to the normal operation as it works on +5v, but the backlight gone
> off and the programmer has no power to feed from and always fails to
> operate.
>
> Can you check that please?
>
>
Will this still be an issue if I am using a newer USB programming cable?
Would it not get it's power from the USB?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160808/6e417c69/attachment.html