[chirp_users] Clean BF-F9+TP Image Required

[Jim Unroe]

Douglas,

Make a fresh download from you radio and email it to me so I can take
a look at it.

Jim KC9HI

On Sat, Sep 26, 2015 at 9:15 AM, Douglas Yates
<chirp.danplanet.com at douglasyates.net> wrote:
> Yes, I'm using the latest daily build (20150814). I can see from
> trawling the bug list that using the wrong build is a common problem.
>
> I did try to follow the recovery instructions, but when I go to the
> link in step 2, I can't find a factory image for my radio. There is
> one called N5R3401(141113N)(factory).img, but if I try to upload that
> one I get an incompatibility error saying "... firmware version of
> the image (N5R3401F8HP-1 ) does not match that of the radio
> (N5R3401BFP3-25)".
>
>
> Douglas Yates
> M6FQI
>
>
> On 26/09/15 13:58, Jim Unroe wrote:
>> On Sat, Sep 26, 2015 at 8:11 AM, Douglas Yates
>> <chirp.danplanet.com at douglasyates.net> wrote:
>>> Hi all
>>>
>>> I have a Pofung BF-F9+TP which I am having problems with. I can't access
>>> the local repeater even though the rig seems to be set up correctly.
>>> It's transmitting on the correct input frequency, but it won't open the
>>> repeater, even though it's on the same settings as my UV-5R which works
>>> just fine.
>>>
>>> I suspect I may have got something wrong during programming and, like
>>> an idiot, I forgot to get a nice clean copy of the software when it
>>> first arrived.
>>>
>>> Does anyone have a known-good image for firmware N5R3401 - BFP3-25,
>>> preferably one that is known to work with a repeater?
>>>
>>>
>>>
>>> Douglas Yates
>>
>> Hi Douglas,
>>
>> Are you are using the latest CHIRP daily build? If you used an older
>> version of CHIRP to upload an incompatible CHIRP Radio Image into your
>> BF-F9+TP, the radio will no longer operate normally. Follow these
>> instructions to restore it to normal operaton:
>>
>> http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
>>
>> If not, then use the link in step (2) to get the "factory" CHIRP Radio
>> Image that you are looking for.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com