[chirp_users] Baofeng UV-5R5 "Radio did not respond"

[Rachel Carr]

The problem was the connector needed trimming.  Many thanks!
 
Rachel Carr
KG5HUX
 
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of John
LaMartina
Sent: Tuesday, September 22, 2015 1:05 PM
To: 'Discussion of CHIRP' <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Baofeng UV-5R5 "Radio did not respond"
 
Rachel, 
"Radio did not Respond" - Refer to
http://www.miklor.com/COM/UV_ErrorMess.php
 
John
 
- http://www.miklor.com
 
 
From: chirp_users-bounces at intrepid.danplanet.com
<mailto:chirp_users-bounces at intrepid.danplanet.com>
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rachel Carr
Sent: Tuesday, September 22, 2015 1:58 AM
To: chirp_users at intrepid.danplanet.com
<mailto:chirp_users at intrepid.danplanet.com> 
Subject: [chirp_users] Baofeng UV-5R5 "Radio did not respond"
 
I just got a Baofeng UV-5R5 radio and Baofeng UV-5R Programming Cable.  I
installed CHIRP 20150814 and Prolific v3.2.0.0 drivers.  When I try to
"Download >From Radio", I get "An error has occurred - Radio did not
respond".
I hope CHIRP supports the UV-5R5 because the Baofeng software appears to be
in Chinese.  Every character displays as a "?" so I don't know if there's a
way to switch it to English.
 

 
Rachel Carr
KG5HUX
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150922/ab4e781e/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 7160 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150922/ab4e781e/attachment.png