[chirp_users] BaoFeng programming

[Craig Ryan]

Jim

You hit the nail on the head. It works great. 

I guess the key is getting an image from the exact firmware on the radio you are programming, and then programming it right back with the updated settings.

Thanks a bunch. You really answered a lot of questions.

Craig
> On Sep 16, 2015, at 2:33 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> Craig,
> 
> Now we are getting somewhere. It looks to me like CHIRP is working
> perfectly. You must not upload an image from another radio into your
> radio where the firmware version does not exactly match.
> 
> Download from your radio and then immediately upload it back.
> 
> If that works, then download from the radio into a tab. The load the
> N5R-20 image into a second tab. Copy and past the channels from the
> N5R-20 tap to the tab from your radio (N5R-219) and upload to your
> radio.
> 
> Jim KC9HI
> 
> On Wed, Sep 16, 2015 at 1:54 AM, Craig Ryan <cryan2820 at ca.rr.com> wrote:
>> 
>> Jim
>> 
>> I tried with "chirp-daily-20150814” GTK 2.24.10 and got the following error.
>> 
>> An error has occurred
>> 
>> The upload was stopped because the firmware version of the image (N5R-20 BFB297 ) does not match that of the radio (N5R-219BFB297 ).
>> 
>> 
>> I bought the cable from Amazon at the time of purchase of my first radio. The package says BaoFengTech.com Programming Cable Genuine FTDI Cable.
>> 
>> Does that help?
>> 
>> Craig
>> 
>> 
>> 
>> On Sep 15, 2015, at 5:48 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>> 
>> Craig,
>> 
>> The first thing that you should is stop using the CHIRP v0.4.x stable build. It is 17 months old. There have been many changes to Baofeng radios in the list 12 months that require the latest daily build for support. Once you've done that we can see where you stand.
>> 
>> Also which chip is in your USB programming cable? FTDI or Prolific?
>> 
>> Jim KC9HI
>> 
>> On Tue, Sep 15, 2015 at 7:41 PM, Craig Ryan <cryan2820 at ca.rr.com> wrote:
>>> 
>>> I have the BaoFeng UV-5R and the BaoFeng BF-F8+ and this problem happens with both radios when I try to program them from CHIRP on my iMac.
>>> 
>>> I just downloaded the new version of CHIRP and it seems to do the frequency programming fine. But I have noticed lately with both the 0.4.0 and 0.4.1 versions, that the Power-On Message that I have programmed, does not come across to the radio. I have menu item 38 on the radio set to msg and the “Message” dialog is set in CHIRP but it does not come across.
>>> There may be other things that do not program as well but the radio performs in the few modes that I use so I dont’ know about any other settings.
>>> 
>>> Also, with both versions, after the programming I get an error message “CHIRP quit unexpectedly” and a long list of comments. I have included a screen shot of the first page. Incidentally, clicking “Reopen” does not reopen CHIRP
>>> 
>>> After this happened several times, I re-installed the Python runtime and had the same results. Do I need to un-install the old Python runtime before installing the latest one?
>>> 
>>> Have you got any other ideas?
>>> 
>>> I’ll look forward to your response.
>>> 
>>> Craig Ryan
>>> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com