[chirp_users] TYT 9800 / chirp driver

[Todd Bloomingdale]

Al,

Are you using the same USB port that you currently use for the Baofeng? I
recently helped a friend with his 9800, and I use a baofeng. If you have
the 3.2.0.0 installed and using on a certain port. Try using the TYT cord
on that same port.

Todd Bloomingdale​-KC9LOX​

Tomah, WI

On Tue, Sep 15, 2015 at 11:39 AM, alfredmjones at yahoo.com <al at aljones.us>
wrote:

> I need some ideas here.  I have a Baofeng UV82L that I program with Chirp
> and have no problem cloning this for the various UV5? radios that people
> have around here.  I'm comfortable with Chirp.
>
>
>
> Recently purchased a TYT 9800; I have no problem programming that from the
> front panel, but I'm a computer junky and it's normally easier to enter /
> fix radio data programmatically.
>
>
>
> Running Windows 10, updated; have a cable that claims to be a TYT (the
> label on the cable); when plugged in device manager reports "Unknown USB
> Device (Device Descriptor Request Failed)"
>
> The Prolific 3.2.0.0 driver announces itself as being available on com 4
> when the Baofeng cable is plugged in; however I see no com ports available
> for the TYT - I have not been able to get either the driver that came with
> the disk or the one available fro Grapevine (retailer in Dallas) to install.
>
>
>
> Any comments / suggestions would be appreciated.  I'm at a loss.
>
> //al
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150915/3b92c7ee/attachment.html