[chirp_users] An error has occurred. Image not supported by radio:

[dwilson]

I have three radios. I used chirp to download an image of the first radio,
made a few changes just to practice the process (added some NOAA
frequencies), saved that file and uploaded it to radio 1. Changes uploaded
fine.

 

I thot' I could use that same fine to upload to the other radios so they
would all be set up the same?

 

I downloaded the image of the second radio and saved it, then tried to
upload the changed file from the first radio to the second but got this
error:

An error has occurred. Image not supported by radio: 'XXXXXXX' where each X
is actually a rectangular box with an upper case X inside.

 

I saw where someone else had this error and it was noted that the firmware
was not the same for the two radios so I checked it and the firmware
displayed in the Firmware Message 1 for both downloads is identical: N5R340A

 

So I'm not sure where to go from here. I guess I can recreate all the
changes in the download from the second radio (?) but kind of wanted to know
what I am doing wrong so the upload of the image from the first radio is not
being supported by the second?

 

Thanks for your help!

debra

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150912/3fc06f3c/attachment.html