[chirp_users] UV-6 programming

[John LaMartina]

Before you started the process, did you initially create a CHIRP template by doing a Download from Radio.

CHIRP supports over 80 various models and requires a template to identify the type radio it will be programming.

Refer to (1.1) http://www.miklor.com/COM/UV_CHIRP.php

I hope this assists.

John

- http://www.miklor.com

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Richard Langmead
Sent: Friday, October 30, 2015 4:04 AM
To: slynchmob at aol.com; Discussion of CHIRP
Subject: Re: [chirp_users] UV-6 programming

 

Hi,

Just a thought as my UV-5RC wouldn't up load from my laptop unless after I'd finished entering the frequencies etc. into Chirp I had to save the page and then X out that file on the screen (plain Chirp screen left on display) then click file, open and then click on the frequency file I'd saved then open, at this point all that I'd saved previously was back on the screen and then carry on the usual way to upload to the radio.

Works on all my different rigs.

Hope this was of use....

 

73, Richard de 5B4AJG

Sent from my iPhone


On 30 Oct 2015, at 00:03, slynchmob--- via chirp_users <chirp_users at intrepid.danplanet.com> wrote:

My UV 6 Baofeng will not respond to up load to chirp I have the right drivers loaded and the wire seem to go all the way in same wire is use for uv82 with no problem 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151030/75c650c7/attachment.html