[chirp_users] 70MHz channels

[Jardy Dawson]

CHIRP isn't  going to know what radio you have unless you read from the radio first.  Then you can find out if the frequency is supported or not. Jardy Dawson
WA7JRD Ham Radio

Sent by hurling dead pigeons over the wall by trebuchet.
 
      From: Simon Rodda <simon at simonrodda.com>
 To: chirp_users at intrepid.danplanet.com 
 Sent: Wednesday, October 14, 2015 7:11 AM
 Subject: [chirp_users] 70MHz channels
   
I'm using a TYT 9800, which supports 66-80MHz, I think.

I've been trying to set frequencies within this range, but CHIRP complains that they are out of supported range. I'm guessing that msg comes from CHIRP, not the radio, since it isn't connected at the time.

Regards,
SR


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151014/7cc1fba9/attachment.html