[chirp_users] Software version discrepancy

[Gary Runningbear]

Can I copy the channels in Mass and how would I do that?
On Nov 18, 2015 8:00 PM, "Gary Runningbear" <runningbear2000 at gmail.com>
wrote:

> Thanks Jim, I'll try that here in just a little bit.
> On Nov 18, 2015 7:58 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:
>
>> On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear
>> <runningbear2000 at gmail.com> wrote:
>> > I just received my second uv-82 L today and in the process of trying to
>> copy
>> > the image of the first radio into the new radio resulted in a error
>> message
>> > stating that the software version of the image did not match the
>> software
>> > version of the radio and would not load the image. Is there a way to
>> bypass
>> > this is I am NOT looking forward to handloading 56 channels worth of
>> > information into the new radio by hand.
>>
>> You download from radio #2 into CHIRP (or load a previously saved image
>> from it)
>> Click File -> Import and then change the file mask from [CHIRP Files
>> (*.chirp)[ to [CHIRP Radio Images (*.img)]
>> Locate and loat the saved image from radio #1.
>> Make any needed changes in the Import From File menu and then click
>> the [OK] button.
>>
>> If that is too much, then just download from both radios to create 2
>> tabs. Then copy-and-past the channels from the tab from radio #1 to
>> the tab from radio #2.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151118/138434aa/attachment.html