[chirp_users] Software version discrepancy

Gary Runningbear
Wed Nov 18 17:00:12 PST 2015


Thanks Jim, I'll try that here in just a little bit.
On Nov 18, 2015 7:58 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear
> <runningbear2000 at gmail.com> wrote:
> > I just received my second uv-82 L today and in the process of trying to
> copy
> > the image of the first radio into the new radio resulted in a error
> message
> > stating that the software version of the image did not match the software
> > version of the radio and would not load the image. Is there a way to
> bypass
> > this is I am NOT looking forward to handloading 56 channels worth of
> > information into the new radio by hand.
>
> You download from radio #2 into CHIRP (or load a previously saved image
> from it)
> Click File -> Import and then change the file mask from [CHIRP Files
> (*.chirp)[ to [CHIRP Radio Images (*.img)]
> Locate and loat the saved image from radio #1.
> Make any needed changes in the Import From File menu and then click
> the [OK] button.
>
> If that is too much, then just download from both radios to create 2
> tabs. Then copy-and-past the channels from the tab from radio #1 to
> the tab from radio #2.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151118/795420a2/attachment.html 


More information about the chirp_users mailing list