[chirp_users] More on UV5R transmit

[Rodger Hess]

That is pretty ugly.


On 11/8/2015 8:32 AM, Jim Unroe wrote:
> On Sun, Nov 8, 2015 at 9:12 AM, Richard Hanna via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
>> A friend who has an older .img that works on his radio gave me t file to
>> try. His works and shuts off transmit.
>>
>> I get this error message when I try to load his image
>>
>>
>> Must be a newer version of firmware.  Other than that the CHIRP  software
>> handles the radio fine.
>>
>> Dick, K3VYY
>>
> You can load you friend's BFB321 image into a second tab. Then you can
> copy-and-paste the channels from the BFB231 tab to the BFS313 tab.
> Then upload the BFS313 tab back to your radio.
>
> The method that I prefer would be to "Import" the channels from the
> BFB231 image into a tab that was created from your BFS313 radio.
>
> 1 click "File" in the menu bar
> 2 click "Import" from the menu that appears
> 3 click the button that shows "CHIRP Files (*.chirp)" and select
> "CHIRP Radio Images (*.ing)" from the list
> 4 locate and load you friends "image" file
> 5 make any desired changes to the "Import From File" menu
> 6 click the [OK] button
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>