[chirp_users] Freq entry

[Gary Runningbear]

To my understanding when you have the +/- showing it indicates you are
using a non-standard split. I get that icon to and everything seems to work
right for the repeater . maybe if we learn to speak Chinese it will work
right! lol
On Nov 5, 2015 12:38 PM, "David Buss" <kd9ebr at gmail.com> wrote:

> I know if I'm in chanel mode, it shows me the pl code but not my offset
> info. But it does have the +/- icon on the screen. If I was showing
> frequency instead of name, I would see the frequency change when I
> transmit.
>
> D. Buss
> KD9EBR
>
> -----Original Message-----
> From: Gary Runningbear <runningbear2000 at gmail.com>
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Thu, 05 Nov 2015 11:33
> Subject: Re: [chirp_users] Freq entry
>
> That is what I am thinking. Sometimes it also happens when I program from
> chirp. Just something I will have to learn to live with I guess.
> On Nov 5, 2015 12:31 PM, "David Buss" <kd9ebr at gmail.com> wrote:
>
>> If it doesn't show the offset icons then something isn't right
>>
>> D. Buss
>> KD9EBR
>>
>> -----Original Message-----
>> From: Gary Runningbear <runningbear2000 at gmail.com>
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Sent: Thu, 05 Nov 2015 11:27
>> Subject: Re: [chirp_users] Freq entry
>>
>> This is all very weird. In channel mode fact and offset icons do not show
>> that channel will not operate properly . if they do show everything works
>> as it should, at least on my uv-82. Too bad the Chinese do not understand
>> how Americans want their radios to work. lol
>> On Nov 5, 2015 12:19 PM, "David Buss" <kd9ebr at gmail.com> wrote:
>>
>>> Oops, forgot to say, it should work properly, just not show it.
>>>
>>> D. Buss
>>> KD9EBR
>>>
>>> -----Original Message-----
>>> From: Gary Runningbear <runningbear2000 at gmail.com>
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>> Sent: Thu, 05 Nov 2015 11:14
>>> Subject: Re: [chirp_users] Freq entry
>>>
>>> Just found another problem. I enter a frequency a ct tone and an offset
>>> and save to a channel. This is in the VFO of Courts. then I go to channel
>>> mode and pull up that channel and find that the CT tone and the offset have
>>> not carried over. It is acting like a simplex frequency. did I do something
>>> wrong or miss something?
>>> On Nov 5, 2015 11:28 AM, "Gary Runningbear" <runningbear2000 at gmail.com>
>>> wrote:
>>>
>>>> Ok. I just figured out how to add up to 5 decimal places. many thanks
>>>> On Nov 5, 2015 11:23 AM, "Jim Unroe" <rock.unroe at gmail.com> wrote:
>>>>
>>>>> On Thu, Nov 5, 2015 at 11:02 AM, Gary Runningbear
>>>>> <runningbear2000 at gmail.com> wrote:
>>>>> > In the UV 82L, when adding frequencies that have four to five digits
>>>>> to the
>>>>> > right of the decimal point how do you get  the last one or two
>>>>> digits in
>>>>> > there?
>>>>> >
>>>>>
>>>>> You just type it into the Frequency cell of the memory spreadsheet
>>>>> editor.
>>>>>
>>>>> If you are talking about entering the frequency into the VFO using the
>>>>> keypad (which has nothing to do with CHIRP), you do the following:
>>>>>
>>>>> 1 set menu 1 (STEP) to a value that is compatible with the frequency
>>>>> that you want to enter
>>>>> 2 key in the 1st 6 digits of the frequency
>>>>> 3 press the [^] up arrow key once
>>>>>
>>>>> For example if you want to listen to FRS channel, 462.5625 MHz
>>>>>
>>>>> 1 Set STEP to 2.5KHZ, 6.25KHZ or 12.5KHZ
>>>>> 2 Key in 462562 (after entering the last 2, the frequency will be
>>>>> rounded off to the 1st STEP compatible frequency below the desired
>>>>> frequency)
>>>>> 3 Press the [^] up arrow key once (the display will read "462.562"
>>>>> followed by a very small 5)
>>>>>
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to
>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>
>>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151105/6ccd2bd5/attachment.html