[chirp_users] Wouxun KG-UV8D

[Shon Edwards]

Hi Steve,

First download from the radio to your computer.  That will set up the right
template for you for that radio.  Then fill in the fields and upload to the
radio.  But make sure when you download to the computer, you're writing
into an empty file, not one that data will get erased from..  Hope that
helps.

Shon K6QT

Shon R. Edwards, MA, AG (Czech Republic)
Amateur call:  K6QT
1039 N 2575 W
Layton, UT, 84041-7709
USA
E-mail:  sre.1966 at gmail.com
Home phone:  (801) 444-3445
Cell:  (605) 209-6064

On Sun, Mar 29, 2015 at 1:53 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sun, Mar 29, 2015 at 3:43 PM, Steve Gouveia <pctek at pacbell.net> wrote:
> > Hi Jim,
> >
> > When I go to select the radio type, it only goes up to the UV6D, and I
> have an 8D.  Can I use the 6D type?
> >
> > Thank you,
> >
> > Steve Gouveia
> > pctek at pacbell.net
>
> No. You are most likely using the year old (next month) CHIRP stable
> build. The support for the KG-UV8D was added in the middle of last
> year (after the stable build was released) so you need to use a daily
> build. The latest daily build would be a good place to start. Check
> the download page for a link.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150329/16fd3da9/attachment.html