[chirp_users] Baofeng BF-F8HP uploading

[mikeheidi1127 at comcast.net]

Thanks, KC1DIQ 

----- Original Message -----

From: "Jim Unroe" <rock.unroe at gmail.com> 
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com> 
Sent: Friday, March 20, 2015 2:44:05 PM 
Subject: Re: [chirp_users] Baofeng BF-F8HP uploading 

On Fri, Mar 20, 2015 at 10:52 AM,  <mail at thekantners.com> wrote: 
> I can download just fine (using ur5 setting), but I can not upload as it 
> does not like the Baofeng model number.   I am using Chrip 4.1 
> Suggestions? 
> 
> Kantner 
> 

Robert is correct. The CHIRP stable build was released in April of 
2014. Support for the BF-F8HP wasn't available until after that. 
That's why the "Supported Radio Models" list on the CHIRP home page 
says "BF-F8HP (in daily builds)". It is important to use a CHIRP daily 
build from September 2014 or after for Baofeng radios. The CHIRP 
v0.4.x stable build should not be used for Baofeng radios. 

Jim KC9HI 
_______________________________________________ 
chirp_users mailing list 
chirp_users at intrepid.danplanet.com 
http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150320/84363574/attachment.html