[chirp_users] Problems programming a BaoFeng BF-888

[Joe abrahamson]

John,

Thanks much and I tried another cable that snapped in more firmly and that
did the trick!

Appreciate the help!

Joe A

On Fri, Mar 6, 2015 at 7:25 PM, John LaMartina <JohnLa at usa.net> wrote:

> This may assist.
> Match your error message to these samples
> http://www.miklor.com/COM/UV_ErrorMess.php
>
> Hope this helps.
>
> John
> http://www.miklor.com
>
>
>
> *From:* chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] *On Behalf Of *Joe abrahamson
> *Sent:* Friday, March 06, 2015 8:45 PM
> *To:* Discussion of CHIRP
> *Subject:* [chirp_users] Problems programming a BaoFeng BF-888
>
>
>
> Well I finally got my BaoFeng UV-5 programmed with everyone's help here
> using Chirp. Works great and I have done it several times.
>
>
>
> Now using the same cable was trying to do the very same thing on a BF-888
> radio. Same computer, same cable and same Chirp but I did change it to the
> correct Radio Model when doing so.
>
>
>
> When I do this the computer does not seem to see the radio and when I hit
> "OK" it goes to the "Cloning"screen and a 1/2 of a second later the "An
> error has occurred. No response from the radio" message pops up.
>
>
>
> Am using the same port, same everything with no luck.
>
>
>
> Any ideas?
>
>
>
> Thanks,
>
>
>
> Joe A
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150306/b8db619c/attachment.html