[chirp_users] TYT TH-9800 Plus

eddie broker
Thu Jul 30 07:11:06 PDT 2015


I did it through chirp have my gprs license and wanted to be able to talk to rinos 

Sent from my iPhone

> On Jul 28, 2015, at 8:54 PM, Eric Tondevold <kf7edq at gmail.com> wrote:
> 
> Can any one please answer a question about these TYT TH-9800 Plus, will they program GMRS or not! Two friends have them and have GMRS on them. I can't get them to program anything to that effect! ?? Maybe I should try the front panel ?
> 
>> On Jul 26, 2015 11:08 AM, "Michael Walker" <va3mw at portcredit.net> wrote:
>> I bet in all the time you 'fussed' with getting it to work, you may have been able to program it via the front panel!  :)
>> 
>> This is what is called a 'time vampire'.
>> 
>> 73, Mike va3mw
>> 
>> 
>>> On Sun, Jul 26, 2015 at 12:58 PM, eddie broker <eddieb at me.com> wrote:
>>> The documentation is deplorable! I was really happy that chirp worked and gives you access to all the settings.  
>>> 
>>> Sent from my iPhone
>>> 
>>>> On Jul 26, 2015, at 8:56 AM, eddie broker <eddieb at me.com> wrote:
>>>> 
>>>> Had 3 of them easily programmed from chirp daily build 
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On Jul 26, 2015, at 8:45 AM, Jeremy Dieringer <jdieringer1028 at sbcglobal.net> wrote:
>>>>> 
>>>>> I was wondering the same thing. (About the programming mode). But there is practically no info online for this radio and this issue). And nothing in the manual, and nothing that I can find on the on-screen menu.
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> On Sunday, July 26, 2015 11:25 AM, Michael Walker <va3mw at portcredit.net> wrote:
>>>>> 
>>>>> 
>>>>> I'm still not sure what you mean.  You do get to Device Manager via Control Panel and you can only see Com ports in the Device Manager.
>>>>> 
>>>>> However, we are past that now and it is either the cable or the radio.  At this point, maybe someone can help you with the radio you are trying to program.  
>>>>> 
>>>>> Does it have to be forced into a programming mode?
>>>>> 
>>>>> Mike
>>>>> 
>>>>> 
>>>>> On Sun, Jul 26, 2015 at 10:50 AM, Jeremy Dieringer <jdieringer1028 at sbcglobal.net> wrote:
>>>>> Control panel and device manager are not the same.  
>>>>> 
>>>>> 
>>>>> Yes - Chirp has COM1 listed. I still receive error.
>>>>> 
>>>>> I am 100% stumped now. I have closed/re-opened plugged/unplugged/re-plugged.
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> On Sunday, July 26, 2015 10:45 AM, Michael Walker <va3mw at portcredit.net> wrote:
>>>>> 
>>>>> 
>>>>> Jeremy
>>>>> 
>>>>> I'm not sure what you mean by by "device manager but not control panel.".  Those are usually the same thing.
>>>>> 
>>>>> Loopback echo would work if you connected pins 2 to 3 on a DB9 connector (if you had one).  You can ignore it though for the time being.
>>>>> 
>>>>> So, if that is the only device, and it is in Windows Control panel, then you will see com 1.  Does Chirp see com1 now?
>>>>> 
>>>>> Mike va3mw
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> On Sun, Jul 26, 2015 at 10:16 AM, Jeremy Dieringer <jdieringer1028 at sbcglobal.net> wrote:
>>>>> Thank you - that "clean up" is  something I was wondering about as well.
>>>>> 
>>>>> I am now on port 1. I check in device manager but not control panel.
>>>>> I used a Com Port" checker, and it says that "This port appears to be a cable without echo loopback"??? Shouldn't it have "echo loopback"?
>>>>> 
>>>>> I will continue trying, and do the "clean up".
>>>>> 
>>>>> Thank you
>>>>> 
>>>>> 
>>>>> 
>>>>> On Sunday, July 26, 2015 9:55 AM, Michael Walker <va3mw at portcredit.net> wrote:
>>>>> 
>>>>> 
>>>>> Hi Jeremy
>>>>> 
>>>>> One of the key parts is that you have to know 100% which serial port the radio is connected to.  Chirp is not able to figure this out on it own.  It has to 100% be sure that if the radio is on the USB RS232 adapter that is labeled as Com 14, that you use that port and that port only.  Otherwise, you will get the failure you are seeing.
>>>>> 
>>>>> Assuming you are  using Windows, can you see Port 14 in Control Panel?  If it isn't there, then Chirp won't be able to see it either.
>>>>> 
>>>>> I would recommend that you watch control panel while plugging in and removing the USB adapter you are trying to use.  This way you can confirm 100% that it is com 14.  It should come and go from control panel.
>>>>> 
>>>>> You may want to also clean up the previous 13 that you may or may not be using.  This procedure works:  http://knowledge.digi.com/articles/Knowledge_Base_Article/Removing-unused-COM-Ports-from-Windows
>>>>> 
>>>>> Don't bother testing with Com 3, 4 or any other port if that isn't the one the radio is connected to.  
>>>>> 
>>>>> Do you have another computer you can test with?
>>>>> 
>>>>> I hope that helps.
>>>>> 
>>>>> Mike
>>>>> 
>>>>> On Sun, Jul 26, 2015 at 9:17 AM, Jeremy Dieringer <jdieringer1028 at sbcglobal.net> wrote:
>>>>> Perfect example. It just did it again. 
>>>>> I switched to port 4, and COM4 Disappeared from the list in CHIRP.
>>>>> 
>>>>> 
>>>>> 
>>>>> On Sunday, July 26, 2015 8:24 AM, Mike va3mw <va3mw at portcredit.net> wrote:
>>>>> 
>>>>> 
>>>>> The problem is the port. Try changing the port number in control panel to something lower than 8. 
>>>>> 
>>>>> Chirp has to see the same port number as the cable you are using for it to work.  That is your problem. 
>>>>> 
>>>>> Mike
>>>>> 
>>>>> 
>>>>> 
>>>>>> On Jul 26, 2015, at 7:58 AM, Jeremy Dieringer <jdieringer1028 at sbcglobal.net> wrote:
>>>>>> 
>>>>>> I am on my 2nd day of trying to program this TYT TH-9800 plus.
>>>>>> I installed the correct USB driver.
>>>>>> 
>>>>>> Tried in CHIRP repeatedly with various ports and keep getting "Communication" error. (Failed to communicate with the radio: Unable to communicate with the radio)
>>>>>> 
>>>>>> My radio is currently Port 14 - however this does not show up in the list in CHIRP. Even When I manually put it on port 3,4,5, no success.
>>>>>> Same with TYT software, it seems like it ONLY wants port 3, however when I place on port 3, no success.
>>>>>> 
>>>>>> Very frustrating.
>>>>>> 
>>>>>> By the way - this link doesn't work (404 error) http://chirp.danplanet.com/download/beta/
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> I'd appreciate any help - Thank you
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>> chirp_users at intrepid.danplanet.com
>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> 
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> 
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150730/c54e613b/attachment.html 


More information about the chirp_users mailing list