[chirp_users] chirp_users Digest, Vol 73, Issue 23
Anthony Capino
Fri Jan 30 17:18:30 PST 2015
I did use the program cable and program it I want to know if I add
Chanel's will it delete the one on the radio
On Friday, January 30, 2015, <chirp_users-request at intrepid.danplanet.com>
wrote:
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com <javascript:;>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com <javascript:;>
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com <javascript:;>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. UV82 Not Programming Via FTDI Cable (KD9BQO - James Brantley)
> 2. UV-5R+ says "image not supported by this radio". what does
> this mean? (Jim)
> 3. Re: UV82 Not Programming Via FTDI Cable (Jim Unroe)
> 4. Re: UV-5R+ says "image not supported by this radio". what
> does this mean? (John LaMartina)
> 5. Re: UV-5R+ says "image not supported by this radio". what
> does this mean? (Jim Unroe)
> 6. still having trouble with software/drivers for Icom 2200H
> (KB1PWN KB1PWN)
> 7. Re: still having trouble with software/drivers for Icom 2200H
> (Jim Unroe)
> 8. Re: still having trouble with software/drivers for Icom 2200H
> (John LaMartina)
> 9. Re: UV-5R+ says "image not supported by this radio". what
> does this mean? (John Rice)
> 10. Re: still having trouble with software/drivers forIcom 2200H (Jim)
> 11. Re: UV-5R+ says "image not supported by this radio". what
> does this mean? (Jim Unroe)
> 12. serial port monitor? (Rob Locher)
> 13. Re: serial port monitor? (Mike Miller)
> 14. New Daily Build (Build System)
> 15. Re: Bug #2155 - Uv-5r not receiving but will transmitt
> (Lawrence Stewart)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 29 Jan 2015 17:40:22 -0600
> From: KD9BQO - James Brantley <kd9bqo at gmail.com <javascript:;>>
> Subject: [chirp_users] UV82 Not Programming Via FTDI Cable
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Message-ID:
> <CAKqHB_NKrRm1=
> vP4YDXAHcNLRMwsKqu4frboKwsYA9k0sCOHFg at mail.gmail.com <javascript:;>>
> Content-Type: text/plain; charset="utf-8"
>
> Hello, I have a UV82 and an FTDI cable, downloads radio information just
> fine and allows me to create CSV file, when I choose upload, the radio led
> show green so there is activity but when the process is complete nothing
> has changed on the radio.
>
> Thanks for any help.
>
>
>
> KD9BQO, James
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150129/eb0bf1e1/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Thu, 29 Jan 2015 18:05:06 -0600
> From: "Jim" <jsites9297 at att.net <javascript:;>>
> Subject: [chirp_users] UV-5R+ says "image not supported by this
> radio". what does this mean?
> To: <chirp_users at intrepid.danplanet.com <javascript:;>>
> Message-ID: <6B0B5171E2584A9281DF88DC5590A04B at JimPC>
> Content-Type: text/plain; charset="iso-8859-1"
>
> UV-5R+ says "image not supported by this radio". what does this mean?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150129/6a42080b/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Thu, 29 Jan 2015 19:19:52 -0500
> From: Jim Unroe <rock.unroe at gmail.com <javascript:;>>
> Subject: Re: [chirp_users] UV82 Not Programming Via FTDI Cable
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <javascript:;>
> >
> Message-ID:
> <CADnO8U6q3Zk7gLUXCEXJ45Wgvw+EAd=VB0vTKkARJrPzTvBP=
> Q at mail.gmail.com <javascript:;>>
> Content-Type: text/plain; charset=UTF-8
>
> On Thu, Jan 29, 2015 at 6:40 PM, KD9BQO - James Brantley
> <kd9bqo at gmail.com <javascript:;>> wrote:
> > Hello, I have a UV82 and an FTDI cable, downloads radio information just
> > fine and allows me to create CSV file, when I choose upload, the radio
> led
> > show green so there is activity but when the process is complete nothing
> has
> > changed on the radio.
> >
> > Thanks for any help.
> >
> >
> >
> > KD9BQO, James
>
> Hi James,
>
> Are you sure? Download from the radio, make a simple change (for
> example, pick and empty Loc row and key in 146.52 into the Frequency
> column and press enter to create a new channel), then upload it back
> to the radio. Now check to see if the channel is there and report
> back.
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 29 Jan 2015 19:23:02 -0500
> From: "John LaMartina" <JohnLa at usa.net <javascript:;>>
> Subject: Re: [chirp_users] UV-5R+ says "image not supported by this
> radio". what does this mean?
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com
> <javascript:;>>
> Message-ID: <00ad01d03c22$e9982000$bcc86000$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> It appears you are attempting to load an image from an older UV5R with and
> older incompatible firmware to a newer UV5R.
> You should either:
>
> 1- Create a new template from the newer radio and do a cut/paste of
> frequencies or
>
> 2- Export to a .csv from the older radio and import it to the newer radio.
>
> CHIRP is handling these as two separate radios.
>
> John
>
>
>
> From: chirp_users-bounces at intrepid.danplanet.com <javascript:;> [mailto:
> chirp_users-bounces at intrepid.danplanet.com <javascript:;>] On Behalf Of
> Jim
> Sent: Thursday, January 29, 2015 7:05 PM
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Subject: [chirp_users] UV-5R+ says "image not supported by this radio".
> what does this mean?
>
>
>
> UV-5R+ says "image not supported by this radio". what does this mean?
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150129/4ad0bce8/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Thu, 29 Jan 2015 19:24:47 -0500
> From: Jim Unroe <rock.unroe at gmail.com <javascript:;>>
> Subject: Re: [chirp_users] UV-5R+ says "image not supported by this
> radio". what does this mean?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <javascript:;>
> >
> Message-ID:
> <CADnO8U4iaYvLkbPM13S=
> 3MX07ApPz1NS_C4naMYvVRhB2ZzLiA at mail.gmail.com <javascript:;>>
> Content-Type: text/plain; charset=UTF-8
>
> You are probably trying to upload a CHIRP Radio Image file that was
> saved from a radio having BFB or BFS firmware into a radio that has
> N5R firmware. That is a no-no.
>
> What you must do is download from the new radio to create a tab
> compatible with that radio. Then import the image that has the
> channels that you are wanting to load into it.
>
> File -> Import -> change file mask to "CHIRP Radio Images (*.img)",
> choose the .img file, and then import the channels that you want into
> the positions that you want, and finally upload into your radio.
>
> Jim KC9HI
>
> On Thu, Jan 29, 2015 at 7:05 PM, Jim <jsites9297 at att.net <javascript:;>>
> wrote:
> > UV-5R+ says "image not supported by this radio". what does this mean?
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com <javascript:;>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
> ------------------------------
>
> Message: 6
> Date: Thu, 29 Jan 2015 21:11:09 -0500
> From: KB1PWN KB1PWN <kb1pwn at gmail.com <javascript:;>>
> Subject: [chirp_users] still having trouble with software/drivers for
> Icom 2200H
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Message-ID:
> <CAFF=fAN8JgvtNQP4LyNKB1dkwpheSFrSSa+dh0=xN=
> QE6i2kUQ at mail.gmail.com <javascript:;>>
> Content-Type: text/plain; charset="utf-8"
>
> I took some screenshots and placed them in a Google doc. Let me know what
> else I should hunt down/share.
>
> I'm missing something in the setup, but I am committed to figuring this
> out.
>
> Many thanks to John and Todd for their swift replies.
>
> Seth
>
>
> https://docs.google.com/presentation/d/1YHJe_5627oxRuNwJa2Pbo8DoLuxCJpo54kgtuGmCRDg/edit?usp=sharing
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150129/69ebfc98/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Thu, 29 Jan 2015 21:15:32 -0500
> From: Jim Unroe <rock.unroe at gmail.com <javascript:;>>
> Subject: Re: [chirp_users] still having trouble with software/drivers
> for Icom 2200H
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <javascript:;>
> >
> Message-ID:
> <
> CADnO8U7YpQNqHdQU+onwPgZDNJMMsBL8YyecvZVp7v+PkfztxA at mail.gmail.com
> <javascript:;>>
> Content-Type: text/plain; charset=UTF-8
>
> On Thu, Jan 29, 2015 at 9:11 PM, KB1PWN KB1PWN <kb1pwn at gmail.com
> <javascript:;>> wrote:
> > I took some screenshots and placed them in a Google doc. Let me know what
> > else I should hunt down/share.
> >
> > I'm missing something in the setup, but I am committed to figuring this
> out.
> >
> > Many thanks to John and Todd for their swift replies.
> >
> > Seth
>
> 1. Downgrade your driver to v3.2.0.0
>
> http://www.miklor.com/COM/UV_Drivers.php
>
> 2. Disable SmartScreen
>
> http://www.miklor.com/COM/UV_CHIRP.php#LoadingCHIRP
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 8
> Date: Thu, 29 Jan 2015 21:37:43 -0500
> From: "John LaMartina" <JohnLa at usa.net <javascript:;>>
> Subject: Re: [chirp_users] still having trouble with software/drivers
> for Icom 2200H
> To: "'KB1PWN KB1PWN'" <kb1pwn at gmail.com <javascript:;>>,
> <chirp_users at intrepid.danplanet.com <javascript:;>>
> Message-ID: <002401d03c35$ba1ab4b0$2e501e10$@net>
> Content-Type: text/plain; charset="utf-8"
>
> Seth,
>
> Two thoughts immediately come to mind:
>
> 1) The driver you are using needs to be backdated to Prolific 3.2.0.0
> If you are using a ?cloned? generic cable as many do, Win7 will load the
> current Prolific driver which is programmed to make the counterfeit chip
> fail.
> The back dated driver should work perfectly. It can be found at
> http://www.miklor.com/COM/UV_Drivers.php
>
> 2) Use CHIRP?s Latest Daily Build.
> 0.4.1 came out many months ago and doesn?t support the newer features of
> many radios.
>
> I hope this helps?
>
> John
>
> http://www.miklor.com
>
>
>
>
>
> From: KB1PWN KB1PWN [mailto:kb1pwn at gmail.com <javascript:;>]
> Sent: Thursday, January 29, 2015 9:11 PM
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Cc: tbloomingdale at gmail.com <javascript:;>; JohnLa at usa.net <javascript:;>
> Subject: still having trouble with software/drivers for Icom 2200H
>
>
>
> I took some screenshots and placed them in a Google doc. Let me know what
> else I should hunt down/share.
>
> I'm missing something in the setup, but I am committed to figuring this
> out.
>
> Many thanks to John and Todd for their swift replies.
>
> Seth
>
>
>
> https://docs.google.com/presentation/d/1YHJe_5627oxRuNwJa2Pbo8DoLuxCJpo54kgtuGmCRDg/edit?usp=sharing
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5646 / Virus Database: 4273/9020 - Release Date: 01/29/15
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150129/f47ef73f/attachment-0001.html
>
> ------------------------------
>
> Message: 9
> Date: Thu, 29 Jan 2015 20:29:30 -0600
> From: John Rice <johnr at k9ij.net <javascript:;>>
> Subject: Re: [chirp_users] UV-5R+ says "image not supported by this
> radio". what does this mean?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <javascript:;>
> >
> Message-ID: <54CAEC8A.2050102 at k9ij.net <javascript:;>>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> How can you determine which firmware your UV5-R has ?
>
> Jim Unroe wrote:
> > You are probably trying to upload a CHIRP Radio Image file that was
> > saved from a radio having BFB or BFS firmware into a radio that has
> > N5R firmware. That is a no-no.
> >
> > What you must do is download from the new radio to create a tab
> > compatible with that radio. Then import the image that has the
> > channels that you are wanting to load into it.
> >
> > File -> Import -> change file mask to "CHIRP Radio Images (*.img)",
> > choose the .img file, and then import the channels that you want into
> > the positions that you want, and finally upload into your radio.
> >
> > Jim KC9HI
> >
> > On Thu, Jan 29, 2015 at 7:05 PM, Jim<jsites9297 at att.net <javascript:;>>
> wrote:
> >> UV-5R+ says "image not supported by this radio". what does this mean?
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com <javascript:;>
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com <javascript:;>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
> --
>
> John Rice K9IJ
> johnr at k9ij.net <javascript:;>
> Webmaster, Network Admin, Janitor
>
>
>
>
> ------------------------------
>
> Message: 10
> Date: Thu, 29 Jan 2015 21:04:00 -0600
> From: "Jim" <jsites9297 at att.net <javascript:;>>
> Subject: Re: [chirp_users] still having trouble with software/drivers
> forIcom 2200H
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com
> <javascript:;>>
> Message-ID: <BD949E74FE81431BBC6E96C3E3B4E0F8 at JimPC>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Well,that kind of worked! I did what you suggested below.and it seemed to
> download fine,but none of my custom settings showed up.It did my name,turn
> off lights I didn't want on,and such,but I have Location 1-14 named FRS and
> programmed for the FRS channels(my group works off of these) but none show
> up on the screen.I have done other radios and as soon as I program them,the
> FRS channel one comes up on the screen.Don't know if I am doing something
> wrong or what.Thanks again for your help.
>
> ----- Original Message -----
> From: "Jim Unroe" <rock.unroe at gmail.com <javascript:;>>
> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com
> <javascript:;>>
> Sent: Thursday, January 29, 2015 8:15 PM
> Subject: Re: [chirp_users] still having trouble with software/drivers
> forIcom 2200H
>
>
> > On Thu, Jan 29, 2015 at 9:11 PM, KB1PWN KB1PWN <kb1pwn at gmail.com
> <javascript:;>> wrote:
> >> I took some screenshots and placed them in a Google doc. Let me know
> what
> >> else I should hunt down/share.
> >>
> >> I'm missing something in the setup, but I am committed to figuring this
> >> out.
> >>
> >> Many thanks to John and Todd for their swift replies.
> >>
> >> Seth
> >
> > 1. Downgrade your driver to v3.2.0.0
> >
> > http://www.miklor.com/COM/UV_Drivers.php
> >
> > 2. Disable SmartScreen
> >
> > http://www.miklor.com/COM/UV_CHIRP.php#LoadingCHIRP
> >
> > Jim KC9HI
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com <javascript:;>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> ------------------------------
>
> Message: 11
> Date: Thu, 29 Jan 2015 22:09:06 -0500
> From: Jim Unroe <rock.unroe at gmail.com <javascript:;>>
> Subject: Re: [chirp_users] UV-5R+ says "image not supported by this
> radio". what does this mean?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <javascript:;>
> >
> Message-ID:
> <CADnO8U6zHUPYHt=
> Xo_hD0VQGdswWmHntB0g2kcJhi4q92ZR3Rg at mail.gmail.com <javascript:;>>
> Content-Type: text/plain; charset=UTF-8
>
> On Thu, Jan 29, 2015 at 9:29 PM, John Rice <johnr at k9ij.net <javascript:;>>
> wrote:
> > How can you determine which firmware your UV5-R has ?
> >
>
> Download from the radio to CHIRP (the best version for Baofeng radios
> is any daily build from October 2014 or later). Then take a look on
> the Settings -> Other Settings menu tab.
>
> If "Firmware Message 1" is " Ver ", then the firmware version is in
> "Firmware Message 2", otherwise the firmware version is in "Firmware
> Message 1". All UV-5R radios (and variants) with firmware version
> after BFB297 will have their "real" firmware version in "Firmware
> Message 1".
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 12
> Date: Thu, 29 Jan 2015 20:43:42 -0800
> From: "Rob Locher" <rob at roblocher.com <javascript:;>>
> Subject: [chirp_users] serial port monitor?
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Message-ID: <op.xs9d24ui0kp21q at esprimo>
> Content-Type: text/plain; charset=utf-8; format=flowed; delsp=yes
>
> Hi all,
>
> I believe I've found a CHIRP bug, er I mean an issue. When I try to
> "Download from Radio" with my ID-880H, I get an error almost immediately:
> "Failed to communicate with the radio: Unexpected response from radio".
> I'm running Ubuntu 14.04 and the 2015-01-23 daily build of Chirp. I use
> the same USB-to-serial converter to troubleshoot hardware devices
> regularly using minicom, so I'm confident it's not a permissions problem.
> I'm able to use the Icom software to program the radio (after booting the
> netbook into Windows, ugh), so I don't think it's an issue with the radio
> or the cable. I checked to see if I have the latest firmware for the
> radio, but there haven't been any updates.
>
> Before I report the issue, I'd like to gather as much information as I
> reasonably can. If there's a relatively simple way to capture the traffic
> on the serial port, I'd like to do that. I did some Googling, and all the
> methods I found seemed complicated. Of course there might be a much
> easier way, like setting a debug level. So I ask the group, is there
> something reasonable that I can do to log the activity on the serial port
> before I report my issue?
>
> 73,
> - Rob W7GH
>
>
> ------------------------------
>
> Message: 13
> Date: Fri, 30 Jan 2015 00:08:48 -0600
> From: "Mike Miller" <lists at kc9doa.com <javascript:;>>
> Subject: Re: [chirp_users] serial port monitor?
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <javascript:;>
> >
> Message-ID: <54CB1FF0.8365.4D2B3242 at lists.kc9doa.com <javascript:;>>
> Content-Type: text/plain; charset=US-ASCII
>
> Hi Rob,
>
> Maybe this link will point you in a useful direction.
> <http://ubuntuforums.org/archive/index.php/t-1579391.html>
>
> 73
> Mike kc9doa
>
> On 29 Jan 2015 at 20:43, Rob Locher wrote:
>
> > Hi all,
> >
> > I believe I've found a CHIRP bug, er I mean an issue. When I
> > try to
> > "Download from Radio" with my ID-880H, I get an error almost
> > immediately:
> > "Failed to communicate with the radio: Unexpected response from
> > radio".
> > I'm running Ubuntu 14.04 and the 2015-01-23 daily build of
> > Chirp. I use
> > the same USB-to-serial converter to troubleshoot hardware
> > devices
> > regularly using minicom, so I'm confident it's not a
> > permissions problem.
> > I'm able to use the Icom software to program the radio (after
> > booting the
> > netbook into Windows, ugh), so I don't think it's an issue with
> > the radio
> > or the cable. I checked to see if I have the latest firmware
> > for the
> > radio, but there haven't been any updates.
> >
> > Before I report the issue, I'd like to gather as much
> > information as I
> > reasonably can. If there's a relatively simple way to capture
> > the traffic
> > on the serial port, I'd like to do that. I did some Googling,
> > and all the
> > methods I found seemed complicated. Of course there might be a
> > much
> > easier way, like setting a debug level. So I ask the group, is
> > there
> > something reasonable that I can do to log the activity on the
> > serial port
> > before I report my issue?
> >
> > 73,
> > - Rob W7GH
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com <javascript:;>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
>
> ------------------------------
>
> Message: 14
> Date: Fri, 30 Jan 2015 00:06:29 -0800 (PST)
> From: Build System <donotreply at danplanet.com <javascript:;>>
> Subject: [chirp_users] New Daily Build
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Message-ID:
> <944426854.25.1422605189532.JavaMail.jenkins at eagle.danplanet.com
> <javascript:;>>
> Content-Type: text/plain; charset="utf-8"
>
> Greetings,
>
> A new daily build of CHIRP is available. This includes changes made
> directly to the tree yesterday, and may include additional features,
> bug fixes, and/or bugs. If you are interested in trying it, grab it
> from the following location:
>
> http://trac.chirp.danplanet.com/chirp_daily/daily-20150130
>
>
> A list of the changes included in this build (since the last daily)
> follows:
>
> Changes for Build #320
> [Dan Smith <dsmith at danplanet.com <javascript:;>>] Add updated Hungarian
> translation from Attila HA5JA
>
> [Jim Unroe <rock.unroe at gmail.com <javascript:;>>] [VV-898] Add Settings
> to Leixen VV-898 Module - Part 10
>
> Add the following settings:
> - Squelch Base Value (UHF)
> - Squelch Base Value (VHF)
>
> related to #2149
>
> [Jim Unroe <rock.unroe at gmail.com <javascript:;>>] [VV-898] Add Settings
> to Leixen VV-898 Module - Part 9
>
> Add the following settings:
> - DTMF Digit Time
> - DTMF Digit Space Time
> - DTMF First Digit Delay
> - DTMF Pretime
> - DTMF * and # Digit Delay
> - DTMF ACK Decode
> - DTMF Side Tone
>
> Corrected spelling error in Part 7
>
> related to #2149
>
> [Jim Unroe <rock.unroe at gmail.com <javascript:;>>] [VV-898] Add Settings
> to Leixen VV-898 Module - Part 8
>
> Add the following settings:
> - VOX Gain Level
> - VOX Delay Time
> - VOX Inhibit on Receive
>
> related to #2149
>
> [Jim Unroe <rock.unroe at gmail.com <javascript:;>>] [VV-898] Add Settings
> to Leixen VV-898 Module - Part 7
>
> Add the following Key Assignment settings:
> - Long Press Time
> - P1 Long
> - P1 Short
> - P2 Long
> - P2 Short
> - P3 Long
> - P3 Short
> - M Short
> - Menu Enable
>
> related to #2149
>
> [K. Arvanitis <kosta at alumni.uvic.ca <javascript:;>>] [PATCH] Dismissing
> save confirmation dialog was closing tab
> A typical gtk Dialog will return a response of RESPONSE_DELETE_EVENT
> when the dialog window is dismissed.
> As a result dismissing the save confirmation dialog was performing
> similarly
> to the user selecting the NO button (RESPONSE_NO)
> This created a situation where a person could possibly loose their changes
> should they dismiss the save confirmation dialog without using the cancel
> button.
> The fix essentially handles both the CANCEL and DELETE_EVENT responses as
> the same.
> Bug #2255
>
> [K. Arvanitis <kosta at alumni.uvic.ca <javascript:;>>] [FT-60] Memory Bank
> Link Scan
> Added settings support for memory bank link scan.
> Extended bitwise int data element to support xor operator.
> Note: The mbs settings are stored in the 16 bits located at
> memory location 0x09E in the high order bits.
> Note: A bank can be linked even if it contains no memories.
> In this case the radio ignores it during the mbl scan.
> Bug #675
> Bug #1945
>
> [Jens Jensen <af5mi at yahoo.com <javascript:;>>] [th9800] fix skip
> scan/priority issues #2247
>
> Skip/priority settings were not taking effect.
> Channel fields were for display only.
> There are special channel banks controlling scan enable and priority.
> This fix manipulates both channel fields and bank flags.
>
> [K. Arvanitis <kosta at alumni.uvic.ca <javascript:;>>] [PATCH] Fix
> Context-Menu Handler in Memory Editor
> This patch modified the behaviour of the button event handler
> for the memory editor to properly select the underlying elements
> of the treeview when using the right mouse button.
> Fixes #2249
>
> [Jens Jensen <af5mi at yahoo.com <javascript:;>>] [th9800] clarify channel
> display mode #1353
>
> change "Frequency or Name" boolean to "Display" choice of Frequency or Name
>
> [K. Arvanitis <kosta at alumni.uvic.ca <javascript:;>>] [PATCH] Fix Link in
> About Dialog
> The URL link in the about dialog is now functional. Tested in both
> Ubuntu and Windows 8.1, verified working.
> Replaced the MessageBox dialog for the 'Documentation' help menu item
> with a hotlink to the website. The URL link in the MessageBox was non-
> functional on Windows and overall it did not provide much information
> outside of the link anyhow.
> Bug #330
>
>
>
> ------------------------------
>
> Message: 15
> Date: Fri, 30 Jan 2015 14:48:10 -0500
> From: Lawrence Stewart <lstew452 at optonline.net <javascript:;>>
> Subject: Re: [chirp_users] Bug #2155 - Uv-5r not receiving but will
> transmitt
> To: chirp_users at intrepid.danplanet.com <javascript:;>
> Message-ID:
>
> <!&!AAAAAAAAAAAYAAAAAAAAAO1vVc0iwwBLhvNAMMo2XWvCgAAAEAAAAKx5XPdqZIFMtBEgSAa/TXYBAAAAAA==@
> optonline.net>
>
> Content-Type: text/plain; charset=us-ascii
>
> I submitted this on Wednesday, January 28, 2015 11:00 PM.
>
> I do not see it the issues log?
>
> 73 KA2HJH,
>
> Sincerely,
>
> Larry Stewart
> Splitrock ARA
> Webmaster
> 862-324-6232
>
>
> -----Original Message-----
> From: Lawrence Stewart [mailto:lstew452 at optonline.net <javascript:;>]
> Sent: Wednesday, January 28, 2015 11:00 PM
> To: 'chirp_users at intrepid.danplanet.com <javascript:;>'
> Subject: Bug #2155 - Uv-5r not receiving but will transmitt
>
> This not fixed. I tried all those steps suggested and it did not work. The
> radio was fine until I loaded my old file with chrip onto the new Uv-5r.
> Then receive got muted.
>
> I tried the factory image and leaving the beep on. Nothing works. I am
> upset
> because it looks like the radio is ruined.
>
> 73 KA2HJH,
>
> Sincerely,
>
> Larry Stewart
> Splitrock ARA
> Webmaster
> 862-324-6232
>
>
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com <javascript:;>
> [mailto:chirp_users-bounces at intrepid.danplanet.com <javascript:;>] On
> Behalf Of
> chirp_users-request at intrepid.danplanet.com <javascript:;>
> Sent: Wednesday, January 28, 2015 10:12 PM
> To: lstew452 at optonline.net <javascript:;>
> Subject: Welcome to the "chirp_users" mailing list (Digest mode)
>
> Welcome to the chirp_users at intrepid.danplanet.com <javascript:;> mailing
> list! This list is
> for discussion of CHIRP use, issues, and beta releases. At any point, the
> latest beta will be available here:
>
> http://chirp.danplanet.com/download/beta/
>
> To post to this list, send your email to:
>
> chirp_users at intrepid.danplanet.com <javascript:;>
>
> General information about the mailing list is at:
>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> If you ever want to unsubscribe or change your options (eg, switch to or
> from digest mode, change your password, etc.), visit your subscription page
> at:
>
>
>
> http://intrepid.danplanet.com/mailman/options/chirp_users/lstew452%40optonli
> ne.net
>
>
> You can also make such adjustments via email by sending a message to:
>
> chirp_users-request at intrepid.danplanet.com <javascript:;>
>
> with the word `help' in the subject or body (don't include the quotes), and
> you will get back a message with instructions.
>
> You must know your password to change your options (including changing the
> password, itself) or to unsubscribe. It is:
>
> pine1brk
>
> Normally, Mailman will remind you of your intrepid.danplanet.com mailing
> list passwords once every month, although you can disable this if you
> prefer. This reminder will also include instructions on how to unsubscribe
> or change your account options. There is also a button on your options
> page
> that will email your current password to you.
>
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com <javascript:;>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 73, Issue 23
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150130/f90ffad5/attachment.html
More information about the chirp_users
mailing list