[chirp_users] still having trouble with software/drivers forIcom 2200H

[Jim]

Well,that kind of worked! I did what you suggested below.and it seemed to 
download fine,but none of my custom settings showed up.It did my name,turn 
off lights I didn't want on,and such,but I have Location 1-14 named FRS and 
programmed for the FRS channels(my group works off of these) but none show 
up on the screen.I have done other radios and as soon as I program them,the 
FRS channel one comes up on the screen.Don't know if I am doing something 
wrong or what.Thanks again for your help.

----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Thursday, January 29, 2015 8:15 PM
Subject: Re: [chirp_users] still having trouble with software/drivers 
forIcom 2200H


> On Thu, Jan 29, 2015 at 9:11 PM, KB1PWN KB1PWN <kb1pwn at gmail.com> wrote:
>> I took some screenshots and placed them in a Google doc. Let me know what
>> else I should hunt down/share.
>>
>> I'm missing something in the setup, but I am committed to figuring this 
>> out.
>>
>> Many thanks to John and Todd for their swift replies.
>>
>> Seth
>
> 1. Downgrade your driver to v3.2.0.0
>
> http://www.miklor.com/COM/UV_Drivers.php
>
> 2. Disable SmartScreen
>
> http://www.miklor.com/COM/UV_CHIRP.php#LoadingCHIRP
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users