[chirp_users] New Daily Build

[Build System]

Greetings,

A new daily build of CHIRP is available.  This includes changes made
directly to the tree yesterday, and may include additional features,
bug fixes, and/or bugs.  If you are interested in trying it, grab it
from the following location:

  http://trac.chirp.danplanet.com/chirp_daily/daily-20150123


A list of the changes included in this build (since the last daily)
follows:

Changes for Build #319
[K. Arvanitis <kosta at alumni.uvic.ca>] [FT-60] Adding Support for Settings to Yaesu FT-60
Added support for most of the basic (but not all) settings avail. on
the FT-60.
Note: some settings map to the memory bank and are therefore
not included in this list.
Note: the list of settings and categories was taken from the
user manual for this radio.
Tested against the specific revision model no. FT-60R.
Feature #1759

[Jens Jensen <af5mi at yahoo.com>] [th9800] add tuning steps per channel #1353

[Jens Jensen <af5mi at yahoo.com>] [th9800] add tx inhibit feature per channel #2229

add tx inhibit feature by setting txfreq and offset to 0.
Causes RX to be normal, but when duplex=off, no TX and ERROR
displayed along with beep.

Note: Minor cosmetic side effect is that display indicates negative duplex
offset, probably because 0 is always < rxfreq. This may be unavoidable unless
we can find an actual channel flag which is designated for tx inhibit.

Also added channel field "reverse" to map.