[chirp_users] UV-5R Says "Radio did not respond"

[Clarence York]

That is exactally what happened to me the first several times I tried to
program my unit. I eventually discovered that I was not pushing the
programming cable into the radio deep enough -- push it all the way into
the socket.

On Fri, Jan 2, 2015 at 6:28 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Fri, Jan 2, 2015 at 6:07 PM, Richard Dillman <ddillman at igc.org> wrote:
> >
> > I'm in a bit of a quandary.  I volunteered to program a friend's UV-5R
> using Chirp, which works a treat with my UV-5RA.  However when I try to
> download from the UV-5R Chirp complains that the radio did not respond.
> Since all is well with my own UV-5RA I assume the software/driver/cable are
> not an issue. I'm using Chirp Daily Build 20150102.  All guidance will be
> much appreciated... especially since I promised to deliver the radio
> tomorrow!
> >
> > Thanks,
> >
> > RD
> >
> > =================================
> > Richard Dillman, T2-GB-061170
> > Chief Operator, Coast Station KSM
> > Maritime Radio Historical Society
> > http://www.radiomarine.org
> > =================================
>
> Hi Richard,
>
> Since the programming cable already works with your radio, the driver
> and programming cable must be OK. This means the problem is that you
> are not getting the plug fully engaged in the radio.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150102/ae92ba20/attachment.html