[chirp_users] BFf8hP

[D.J.J. Ring, Jr.]

Jim,

Larry, N6NEV is understandably confused.  People refer him back to you
message (below) in which you made an error.

You meant to tell him he needs a DAILY build, but you told him in error he
needed the stable build.

Larry, Jim typed the wrong thing, you need the latest daily build.

David N1EA
 On Feb 26, 2015 2:30 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> Larry,
>
> This is because you are using the CHIRP stable build and it does not
> support the radios with 3 power levels. You must use a CHIRP stable
> build which will have a BF-F8HP model selection.
>
> Jim KC9HI
>
> On Thu, Feb 26, 2015 at 2:20 PM, Larry Lindsay <larrylindsay0 at gmail.com>
> wrote:
> > I am using UV 5R for the. G  U. I.   Down load is fine.    But cannot
> upload
> > to radio I get error code.      Unsupported firmware version.   N 5 R
> > 3403f8HP 1. XX
> > Lost again.    Thanks for all support
> > Larry. n6nev.
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150226/0c6b503f/attachment.html