[chirp_users] CHIRP Feature Request

[Augusto Gabaldoni]

Hi all,

 

I am new in this so not an expert at all. Help will be greatly appreciated.
I have two Baofeng BF-F8HP and was successful in modifying the operational
range of them. I have extended the frequency range using the following
parameters:

VHF: 108.000 to 177.000

UHF: 385.000 to 570.000

 

I have successfully tested both radios to transmit and receive on the
following range:

 

VHF: 128.450 to 177.9975

UHF: 385.3725 to 570.4775

 

I still have to use my scanner to confirm that they are transmitting on that
whole range, but the radios do communicate on it. I have used the 108.00
lower range on VHF to try receiving Air Band, but still have to confirm if I
can receive on that range.

 

One problem I have with CHIRP is that it does not allow me to add channels
on that range which would be very useful to identify by name those
frequencies (GROUND, ATIS, APPROACH, CLEARANCE etc.) CHIRP says those
frequencies are beyond operational range.

I can save those frequencies in memory on the radio interface but I cannot
add a name to them.

 

Is there a way to make CHIRP do this, or does it need this added as a new
feature?

 

Thanks!

 

Augusto Gabaldoni

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150216/44c2141b/attachment.html