[chirp_users] Error Trying To Download From FT-1D
Aubrey Turner
Thu Feb 12 12:08:56 PST 2015
I finally found the driver installer and unpack it (using WINE on Ubuntu
so as not to mess up my Windows laptop).
What I found is that the Windows driver is just a repackaged version of
the FTDI drivers using the vendor and device IDs that RATOC has assigned
to the cable.
So, you might be able to try using modprobe to load the the FTDI driver
(ftdi_sio) and the RATOC IDs. It's not guaranteed to work, but it may
be worth a try.
On 02/12/2015 01:04 PM, n4lbl wrote:
> The Yaesu website is partially back. You'll likely need to install
> xCHM to read the documentation. Grumble. Grumble.
>
> I can send you the .zip if you like.
>
> thanx,,,
>
> On Thu, Feb 12, 2015 at 11:49 AM, Aubrey Turner
> <aubrey.c.turner at gmail.com <mailto:aubrey.c.turner at gmail.com>> wrote:
>
> I found two web pages that together suggest that the device is
> actually
> using an FTDI chipset internally.
>
> The first is actually an entry in the CHIRP issue tracker:
> - http://chirp.danplanet.com/issues/967
>
> They tore the device open and found an FTDI chip inside. They also
> added the IDs to allow the driver to load, but it didn't seem to be
> working. The suggestion is that the driver needs to have these ids
> added to it.
>
> The other is a product brochure from RATOC that suggests using an FTDI
> driver package with their converter (but this was on Android, of all
> things). Still, it points to FTDI as the right chipset.
>
> I started to see if I could download the Yaesu driver for Windows and
> take it apart to see what actual driver was inside, but for some
> reason
> I cannot get to the Yaesu website.
>
> --Aubrey
>
>
> On 02/12/2015 12:43 PM, W Paul Mills wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > Unfortunately, it looks like your cable is not supported in
> linux. See
> > <http://www.linux-usb.org/usb.ids>
> >
> > device id b03a is not shown under vendor id 0584
> >
> > Relevant section:
> >
> > #quote
> > 0584 RATOC System, Inc.
> > 0008 Fujifilm MemoryCard ReaderWriter
> > 0220 U2SCX SCSI Converter
> > 0304 U2SCX-LVD (SCSI Converter)
> > b000 REX-USB60
> > b020 REX-USB60F
> > #end quote
> >
> >
> >
> >
> > On 02/12/2015 11:56 AM, n4lbl wrote:
> >> Thanks Aubrey. lsusb is at least familiar to me. The before and
> >> after are:
> >>
> >> n4lbl at eel:~$ lsusb Bus 001 Device 004: ID 13d3:5702 IMC Networks
> >> UVC VGA Webcam Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp.
> >> Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux
> >> Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub Bus 002 Device 002: ID 045e:0737 Microsoft
> >> Corp. Compact Optical Mouse 500 Bus 002 Device 001: ID 1d6b:0001
> >> Linux Foundation 1.1 root hub
> >>
> >> n4lbl at eel:~$ lsusb Bus 001 Device 004: ID 13d3:5702 IMC Networks
> >> UVC VGA Webcam Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp.
> >> Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux
> >> Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub Bus 002 Device 005: ID 0584:b03a RATOC
> >> System, Inc. Bus 002 Device 002: ID 045e:0737 Microsoft Corp.
> >> Compact Optical Mouse 500 Bus 002 Device 001: ID 1d6b:0001 Linux
> >> Foundation 1.1 root hub
> >>
> >> At this moment the radio isn't connected to the cable as it is
> >> being recharged.
> >>
> >> n4lbl at eel:~$ tail -f /var/log/syslog Feb 12 10:45:17 eel mtp-probe:
> >> bus: 2, device: 6 was not an MTP device Feb 12 10:46:21 eel kernel:
> >> [155678.200326] usb 2-2: USB disconnect, device number 6 Feb 12
> >> 10:47:35 eel kernel: [155752.168182] usb 2-2: new full-speed USB
> >> device number 7 using uhci_hcd Feb 12 10:47:35 eel kernel:
> >> [155752.370019] usb 2-2: New USB device found, idVendor=0584,
> >> idProduct=b03a Feb 12 10:47:35 eel kernel: [155752.370035] usb 2-2:
> >> New USB device strings: Mfr=1, Product=2, SerialNumber=0 Feb 12
> >> 10:47:35 eel kernel: [155752.370046] usb 2-2: Product: USB-Serial
> >> Converter Feb 12 10:47:35 eel kernel: [155752.370056] usb 2-2:
> >> Manufacturer: RATOC Systems,Inc. Feb 12 10:47:35 eel mtp-probe:
> >> checking bus 2, device 7:
> >> "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2" Feb 12 10:47:35 eel
> >> mtp-probe: bus: 2, device: 7 was not an MTP device Feb 12 10:49:39
> >> eel kernel: [155876.104263] usb 2-2: USB disconnect, device number
> >> 7 comment: inserted cable here Feb 12 10:51:18 eel kernel:
> >> [155975.080158] usb 2-2: new full-speed USB device number 8 using
> >> uhci_hcd Feb 12 10:51:18 eel kernel: [155975.280118] usb 2-2: New
> >> USB device found, idVendor=0584, idProduct=b03a Feb 12 10:51:18 eel
> >> kernel: [155975.280129] usb 2-2: New USB device strings: Mfr=1,
> >> Product=2, SerialNumber=0 Feb 12 10:51:18 eel kernel:
> >> [155975.280138] usb 2-2: Product: USB-Serial Converter Feb 12
> >> 10:51:18 eel kernel: [155975.280146] usb 2-2: Manufacturer: RATOC
> >> Systems,Inc. Feb 12 10:51:18 eel mtp-probe: checking bus 2, device
> >> 8: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2" Feb 12 10:51:18
> >> eel mtp-probe: bus: 2, device: 8 was not an MTP device
> >>
> >> I wish I knew what to do next!
> >>
> >> thanx,,, Alan,,, n4lbl
> >
> > - --
> > /*************************************************
> > * Amateur Radio Station AC0HY *
> > * W. Paul Mills SN807 *
> > * Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
> > * President Kaw Valley Amateur Radio Club *
> > *************************************************/
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1
> >
> > iEYEARECAAYFAlTc9G0ACgkQ5tjVbfWfElyyQwCaA5IVbd1wzLaNM9IaBGGtGBeS
> > 4QYAoJLlhRjb/j2gTgoeK4j/97s+TLaX
> > =Mzwn
> > -----END PGP SIGNATURE-----
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > Unsubscribe:
> http://intrepid.danplanet.com/mailman/options/chirp_users
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> Unsubscribe: http://intrepid.danplanet.com/mailman/options/chirp_users
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> Unsubscribe: http://intrepid.danplanet.com/mailman/options/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150212/9ea61da9/attachment.html
More information about the chirp_users
mailing list