[chirp_users] Baofeng UV-5r

[Marven Konzelman]

Ok,yes it works fine now that I selected the right model number.I was using 
uv-5r as the model before. Thanks for the help....Marv   VE4KE

-----Original Message----- 
From: Jim Unroe
Sent: Monday, August 24, 2015 4:30 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5r

Marv,

Any recent daily build of CHIRP will work with your radio. Since it
has 3 power levels, you would just choose the BF-F8HP as the model.

Jim KC9HI

On Sun, Aug 23, 2015 at 10:37 PM, Marven Konzelman <ve4ke at mymts.net> wrote:
> Hi! I am a new subscriber to this list. Can anyone tell me if there is a
> daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that
> will show the tree power levels. I found builds that work with my radio 
> but
> they just show the high and low power levels.    Thanks   Marv VE4KE
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com