[chirp_users] Baofeng UV-5R and Wouxun KG-UVD8

[eddie broker]

The just unscrew and it seems to reduce interface 

Sent while speeding 

> On Apr 20, 2015, at 8:33 AM, John Wuest <ultimafi at yahoo.com> wrote:
> 
> There is NO reason to take the antenna off. In fact, that could damage your radio.
> 
> From: eddie broker <eddieb at me.com>
> To: "rolle at stavlind.se" <rolle at stavlind.se>; Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
> Sent: Monday, April 20, 2015 10:24 AM
> Subject: Re: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
> 
> I have had same issue on several of them removing antenna and turning up volume helped still took 20 try's 
> 
> Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible.
> 
> 
>> On Apr 20, 2015, at 7:19 AM, Rolle Stavlind <rolle at stavlind.se> wrote:
>> 
>> Hi!
>>  
>> As you can see on the third clip. It is even impossible to download from the radio.
>> I have no problems with the other stations.
>> /Rolle
>>  
>> ---
>> Rolle Stavlind
>> Ledinge Kvarnbol 444
>> 741 90 Knivsta
>> Tel 018-345597 
>> GSM 070-5219597
>> FAX 070-6109597 
>> E-post rolle at stavlind.se
>> 2015-04-20 12:50 skrev John LaMartina:
>>> The two image files are not compatible.
>>> CHIRP supports over 80 makes and models of radio.  
>>> 
>>> You must first create an initial template for your specific model. 
>>> This gives CHIRP a starting image of your radio and firmware. 
>>> This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. 
>>> This loads your radio's initial parameters.
>>>   
>>> You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
>>> 
>>> 
>>> John
>>> http://www.miklor.com
>>>  
>>>  
>>> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3
>>> Sent: Monday, April 20, 2015 1:40 AM
>>> To: chirp_users at intrepid.danplanet.com
>>> Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
>>>  
>>> Hi!
>>>  
>>> Got problems when try to program one off my Baofeng UV-5R.
>>> See the screens dumps below.
>>> Using the daily file from 20150416.
>>> Using Baofeng software the radio works.
>>>  
>>> The other UV-5R works fine both with Chirp and Baofeng software         
>>>  
>>> When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
>>>  
>>>  
>>> /Rolle
>>>  
>>>  
>>> <image001.png>
>>>  
>>> <image002.png>
>>>  
>>> <image003.png>
>>> 
>>> 
>>>  
>>> Rolle Stavlind
>>>  
>>> Ledinge Kvarnbol 444
>>> 741 90 Knivsta
>>> Tel 018-345597
>>> Mobil 070-5219597
>>> Mail rolle at stavlind.se
>>>  
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150420/d7ab13dd/attachment.html