[chirp_users] Programming Yaesu FT-7800

[Pete Mackie]

> On Oct 18, 2014, at 3:39 PM, Milton <thecanesvenatici at gmail.com> wrote:
> 
> Download the manual for the radio. it should have a pinout of the data connection. My FT-8900 is wired the same as your rig, I don't think they have changed the pin numbers since they started using the mini DIN plug for data. I used spare Wouxon cable and put a mini DIN plug on it to use to program my 8900. 
> 
> On Sat, Oct 18, 2014 at 4:54 PM, <ARSK0MBB at aol.com <mailto:ARSK0MBB at aol.com>> wrote:
> Hello All,
>  
> I have a Yaesu FT-7800 radio which I program manually.  I also have a Baofeng UV-5RE plus with programming cable.  I run Windows 7.  I have successfully programmed the Baofeng and would like to know if anyone has used CHIRP and the UV-5RE programming cable to program the Yaesu FT-7800.  The FT-7800 uses a PS2 type connector at the rear of the radio so I would have to make a custom cable interface which is no problem, I'm just puzzled over the connections / pinout.  Thanks & 73
> Jerry S.  R.Ph.  KØMBB
> 
> ______________________________________________
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141018/44bfa13e/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: screenshot_939.png
Type: image/png
Size: 33362 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141018/44bfa13e/attachment.png