[chirp_users] chirp_users Digest, Vol 71, Issue 5

Fri Nov 14 20:14:21 PST 2014

Unsubscribe
On Nov 10, 2014 1:00 PM, <chirp_users-request at intrepid.danplanet.com> wrote:

> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Re: Dstar ID-RP4000V Repeater (Jim Unroe)
>    2. Osx 10 Yosemite for PL2303 cord (Milton)
>    3. Re: FYI BF-F8HP programming (Michael Hilbert)
>    4. Re: FYI BF-F8HP programming (Jim Unroe)
>    5. Re: FYI BF-F8HP programming (Mike Hilbert)
>    6. Re: FYI BF-F8HP programming (Jim Unroe)
>    7. Re: FYI BF-F8HP programming (Mike Hilbert)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 9 Nov 2014 15:26:28 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Dstar ID-RP4000V Repeater
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADnO8U5Uj89GGN-aMytOyajAeGEn9iR_wxi4Lq=
> kiWZmBA+_6w at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Bob,
>
> The CHIRP driver is idrp.py and for some reason it does not show up as
> a choice in CHIRP (I believe it should be "ID-2000V/4000V/2D/2V").
> Most of the activity of this driver appears to be from 2009 to 2012. I
> installed a daily build from May of 2012 and March of 2012 and there
> was still not a selection for this Icom model.
>
> Jim KC9HI
>
> On Sat, Nov 8, 2014 at 11:35 PM, Robert Keeton <rkeeton at blarg.net> wrote:
> > I have an ICOM , ID-RP4000V Dstar repeater.  According to the Wiki page
> both
> > the VHF and UHF repeater is supported.  When I check the daily build
> list it
> > is not shown as supported and I could not locate a *.py file for the
> > repeater.  I have been through the archives and found reference that
> support
> > for the ID-RP400V was added and it was working , but not much other info.
> > When I run Chirp to try detect the repeater/radio I get an error message
> ?
> > An error has occurred Unable to get radio model?.  I have tried both the
> > most up to date windows version and a USB thumb drive with the Live CD
> > loaded.  Both versions operate fine , but with the error message.  Any
> > suggestions????
> >
> > Bob K7MHJ
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 10 Nov 2014 08:56:30 -0500
> From: Milton <thecanesvenatici at gmail.com>
> Subject: [chirp_users] Osx 10 Yosemite for PL2303 cord
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CAChAUo=
> 77d+ajEMJFDBeoTAE_azM2_zQAFz5XKft0K+EtPDHTg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I've installed the supposed updated driver from Sorceforge but no worky.
>
>
> kextstat -b nl.bjaelectronics.driver.PL2303 is empty
>
> also
>
> Kext nl.bjaelectronics.driver.PL2303 not found for unload request.
> Kext net.sourceforge.osx-pl2303 not found for unload request.
> Kext com.prolific.driver.PL2303 not found for unload r
>
>
> Any ideas?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141110/631cd05f/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Mon, 10 Nov 2014 09:17:04 -0700
> From: Michael Hilbert <mikehilbert1 at gmail.com>
> Subject: Re: [chirp_users] FYI BF-F8HP programming
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CADXhZy5z0h+nFwdy+TDy-T96vcNKPr9MgZqDy5nOPgzGmne9xw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I can download from the radio but cannot upload same file back to the
> radio.  The following error occurs:
>
> Unsupported Firmware Version ....N5R-313F8HP-1
>
> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
> the error above.  Help? Mike
>
> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj at usa.com> wrote:
>
> > Got mine in today and did a test download (1st!!) and then a test change
> > and it uploaded perfectly.  I?m using the daily build of Chirp and a Mac
> > Mini and the same cable that I use with my UV-82 and UV-82C.
> >
> > No worries?.
> >
> > :)
> >
> > Forrest
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141110/c29d6f62/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Mon, 10 Nov 2014 12:23:56 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] FYI BF-F8HP programming
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADnO8U5ft2Xu6+QVemJWmbs5YBLAPqP5p3=
> HLquG6PKexr9azg at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> It doesn't sound like you are using the latest CHIRP daily build.
> Which version of CHIRP are you using?
>
> Jim KC9HI
>
> On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
> <mikehilbert1 at gmail.com> wrote:
> > I can download from the radio but cannot upload same file back to the
> radio.
> > The following error occurs:
> >
> > Unsupported Firmware Version ....N5R-313F8HP-1
> >
> > Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
> > the error above.  Help? Mike
> >
> > On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj at usa.com> wrote:
> >>
> >> Got mine in today and did a test download (1st!!) and then a test change
> >> and it uploaded perfectly.  I?m using the daily build of Chirp and a Mac
> >> Mini and the same cable that I use with my UV-82 and UV-82C.
> >>
> >> No worries?.
> >>
> >> :)
> >>
> >> Forrest
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 10 Nov 2014 10:30:38 -0700
> From: Mike Hilbert <mikehilbert1 at gmail.com>
> Subject: Re: [chirp_users] FYI BF-F8HP programming
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <EF146E91-8ABD-4E3C-8999-9663B3B59E83 at gmail.com>
> Content-Type: text/plain;       charset=utf-8
>
> 4.1
>
> Sent from my iPhone
>
> > On Nov 10, 2014, at 10:23 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> >
> > It doesn't sound like you are using the latest CHIRP daily build.
> > Which version of CHIRP are you using?
> >
> > Jim KC9HI
> >
> > On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
> > <mikehilbert1 at gmail.com> wrote:
> >> I can download from the radio but cannot upload same file back to the
> radio.
> >> The following error occurs:
> >>
> >> Unsupported Firmware Version ....N5R-313F8HP-1
> >>
> >> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP
> gives
> >> the error above.  Help? Mike
> >>
> >>> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj at usa.com> wrote:
> >>>
> >>> Got mine in today and did a test download (1st!!) and then a test
> change
> >>> and it uploaded perfectly.  I?m using the daily build of Chirp and a
> Mac
> >>> Mini and the same cable that I use with my UV-82 and UV-82C.
> >>>
> >>> No worries?.
> >>>
> >>> :)
> >>>
> >>> Forrest
> >>>
> >>> _______________________________________________
> >>> chirp_users mailing list
> >>> chirp_users at intrepid.danplanet.com
> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>
> >>
> >>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 10 Nov 2014 12:40:07 -0500
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] FYI BF-F8HP programming
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CADnO8U5sfMXe-z=ewARv=F8JM_=
> K2bBYLM_EYzusMf9tB_Bppw at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> There is no support for the BF-F8HP in V0.4.1. Because of firmware
> changes, it is not recommended that the stable release be used for any
> Baofeng UV-5R variants including the BF-F8HP. Upgrade to the latest
> daily build for BF-F8HP support
>
> Jim KC9HI
>
> On Mon, Nov 10, 2014 at 12:30 PM, Mike Hilbert <mikehilbert1 at gmail.com>
> wrote:
> > 4.1
> >
> > Sent from my iPhone
> >
> >> On Nov 10, 2014, at 10:23 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> >>
> >> It doesn't sound like you are using the latest CHIRP daily build.
> >> Which version of CHIRP are you using?
> >>
> >> Jim KC9HI
> >>
> >> On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
> >> <mikehilbert1 at gmail.com> wrote:
> >>> I can download from the radio but cannot upload same file back to the
> radio.
> >>> The following error occurs:
> >>>
> >>> Unsupported Firmware Version ....N5R-313F8HP-1
> >>>
> >>> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP
> gives
> >>> the error above.  Help? Mike
> >>>
> >>>> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj at usa.com> wrote:
> >>>>
> >>>> Got mine in today and did a test download (1st!!) and then a test
> change
> >>>> and it uploaded perfectly.  I?m using the daily build of Chirp and a
> Mac
> >>>> Mini and the same cable that I use with my UV-82 and UV-82C.
> >>>>
> >>>> No worries?.
> >>>>
> >>>> :)
> >>>>
> >>>> Forrest
> >>>>
> >>>> _______________________________________________
> >>>> chirp_users mailing list
> >>>> chirp_users at intrepid.danplanet.com
> >>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> chirp_users mailing list
> >>> chirp_users at intrepid.danplanet.com
> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>>
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> ------------------------------
>
> Message: 7
> Date: Mon, 10 Nov 2014 11:14:37 -0700
> From: Mike Hilbert <mikehilbert1 at gmail.com>
> Subject: Re: [chirp_users] FYI BF-F8HP programming
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <50DEF662-C210-4933-956D-6A527B767B37 at gmail.com>
> Content-Type: text/plain;       charset=utf-8
>
> That worked Jim. Thank you very much!  Mike AF7JS.
>
> Sent from my iPhone
>
> > On Nov 10, 2014, at 10:40 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> >
> > There is no support for the BF-F8HP in V0.4.1. Because of firmware
> > changes, it is not recommended that the stable release be used for any
> > Baofeng UV-5R variants including the BF-F8HP. Upgrade to the latest
> > daily build for BF-F8HP support
> >
> > Jim KC9HI
> >
> >> On Mon, Nov 10, 2014 at 12:30 PM, Mike Hilbert <mikehilbert1 at gmail.com>
> wrote:
> >> 4.1
> >>
> >> Sent from my iPhone
> >>
> >>> On Nov 10, 2014, at 10:23 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
> >>>
> >>> It doesn't sound like you are using the latest CHIRP daily build.
> >>> Which version of CHIRP are you using?
> >>>
> >>> Jim KC9HI
> >>>
> >>> On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
> >>> <mikehilbert1 at gmail.com> wrote:
> >>>> I can download from the radio but cannot upload same file back to the
> radio.
> >>>> The following error occurs:
> >>>>
> >>>> Unsupported Firmware Version ....N5R-313F8HP-1
> >>>>
> >>>> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP
> gives
> >>>> the error above.  Help? Mike
> >>>>
> >>>>> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj at usa.com> wrote:
> >>>>>
> >>>>> Got mine in today and did a test download (1st!!) and then a test
> change
> >>>>> and it uploaded perfectly.  I?m using the daily build of Chirp and a
> Mac
> >>>>> Mini and the same cable that I use with my UV-82 and UV-82C.
> >>>>>
> >>>>> No worries?.
> >>>>>
> >>>>> :)
> >>>>>
> >>>>> Forrest
> >>>>>
> >>>>> _______________________________________________
> >>>>> chirp_users mailing list
> >>>>> chirp_users at intrepid.danplanet.com
> >>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> chirp_users mailing list
> >>>> chirp_users at intrepid.danplanet.com
> >>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >>> _______________________________________________
> >>> chirp_users mailing list
> >>> chirp_users at intrepid.danplanet.com
> >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >> _______________________________________________
> >> chirp_users mailing list
> >> chirp_users at intrepid.danplanet.com
> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 71, Issue 5
> ******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141114/6055e05f/attachment.html 