[chirp_users] Trying to use chirp via ser2net and socat

[Tom Hayward]

On Wed, Nov 5, 2014 at 1:37 PM, Andrew <ziltro at ziltro.com> wrote:
> What you could do is to unplug the cable from the radio and connect the
> TX and RX pins together. (I don't know what the cable is so I don't know
> which pins this or how easy it would be to do.)
>
> Once you do that any data you manage to send to the serial port will
> come straight back again, so you can test that the link is working, and
> it works at any baud rate.

The Yaesu cable does this internally, so no modification necessary.

Tom KD7LXL