[chirp_users] Programing a Baofeng UV-82 with Chirp on osx 10.9.2
Christian Schwarz
Wed May 14 09:34:19 PDT 2014
Hi Marthijn,
the cable I use is this: http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from its appearance.
Sure, send me your driver. I’ll try anything once. Do you know if I need to unload the current driver…and in case I have to, how I do it? Sorry for the noob questions.
Cheers,
Chris
On May 14, 2014, at 5:32 PM, Marthijn Soesbergen <marthijnsoesbergen at gmail.com> wrote:
> Christian,
>
> Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?
>
> Regards,
> Marthijn Soesbergen
>
> Verstuurd vanaf mijn iPhone
>
> Op 14 mei 2014 om 17:01 heeft Christian Schwarz <coffeeisallineed at gmail.com> het volgende geschreven:
>
>> Hi everybody,
>>
>> I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:
>>
>> USB-Serial Controller:
>>
>> Product ID: 0x2303
>> Vendor ID: 0x067b (Prolific Technology, Inc.)
>> Version: 3.00
>> Speed: Up to 12 Mb/sec
>> Manufacturer: Prolific Technology Inc.
>> Location ID: 0xfa130000 / 6
>> Current Available (mA): 500
>> Current Required (mA): 100
>>
>> When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:
>>
>> - /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio did not respond
>> - /dev/cu.Bluetooth-Modem error: An error has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem'
>> - /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond
>> - /dev/cu.usbserial error: Radio did not respond
>>
>> Any ideas? I am using the USB programming cable from Baofeng, that came with the radio.
>>
>> btw. under windows7 (installed on the mbp) it works like a charm.
>>
>> Cheers,
>> Chris
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140514/953c0fe7/attachment.html
More information about the chirp_users
mailing list