[chirp_users] Cannot program Simplex from Imported CSV

[John Kellas]

Thanks for that Jeff. That is helpful, as I had forgotten about that edit
mode being a possibility.

You mention you had the problem with a Wouxun. I noticed the problem when I
first programmed a Wouxun KG-816. I had assumed that when the offset was
blank it would Tx on the same frequency, then later discovered I was wrong.

My channels are grouped, they are arranged by Tx frequency so that I can
color code the appropriate antennas. So my only dilemma would be if I sort
on Duplex, getting them back into ascending order based on the Tx frequency
seems like it would be problematic because I don't have a Tx frequency to
sort on, just the offset. But if I see Duplex = (None), then in fact I do
have simplex after all?


Regards,
John Kellas
403-762-2333


On Mon, Mar 31, 2014 at 2:57 PM, Jeff <wireless3.14159 at gmail.com> wrote:

> It's been a while, but I remember having similar problems after importing
> channels from a Wouxun 2D.
>
> IIRC, freqs that I didn't want to transmit on (e.g. public service)
> suddenly had xmit frequencies on the 5R. I don't remember what the process
> did to simplex, but in any case I just sorted the CHIRP columns by
> "duplex," bulk-selected the ones that weren't right, then right-clicked
> into editing mode to change them all at once.
>
> Duplex = "none" is simplex, and "off" for xmit inhibit.
>
> Hope this helps.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140331/49ce264a/attachment.html