[chirp_users] FT 60R

[Dave Ritchie]

GT,  
   please make certain your cables are completely seated on both the 
radio and the PC sides.

73, Dave N4DJS






On Saturday, March 1, 2014 10:16 PM, G T <w7gus at hotmail.com> wrote:
 
I tried it a few times as quick as i could. Just like the you tube video.
TNX
73




________________________________
Date: Sat, 1 Mar 2014 18:33:23 -0800
From: rtsears at comcast.net
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] FT 60R


Yes, I understand that, but downloading and uploads from your radio follows a modified "cloning" procedure. 

In essence you computer running Chirp is another radio and you are
      cloning.

The important point I was trying to make was to set your radio to
      receive before setting Chirp to send.

On 3/1/2014 6:24 PM, G T wrote:

 
>I don't have another radio, I was using Chirp to add more repeaters to the list. The initial cloning was done by someone else.
>73
>W7GUS
>
>
>
>
>________________________________
>Date: Sat, 1 Mar 2014 18:21:43 -0800
>From: rtsears at comcast.net
>To: chirp_users at intrepid.danplanet.com
>Subject: Re: [chirp_users] FT 60R
>
>
>I have an FT-60 and you have to be quick
>
>Here is the section from the manual on cloning.
>
>The FT-60R includes a convenient “Clone” feature, which
            allows the memory and configuration
>data from one transceiver to be transferred to another
            FT-60R. This can be
>particularly useful when configuring a number of
            transceivers for a public service operation.
>Here is the procedure for Cloning one radio’s data to
            another:
>1. Turn both radios off.
>2. Connect the optional CT-27 Clone Cable between the MIC/SP
            jacks of the two radios.
>3. Press and hold in the MONI switch (just below the PTT
            switch) while turning the radios on. Do this for both radios
            (the order of switch-on does not matter).
>4. Rotate the DIAL job on each radio to select to “F8
            CLONE,” then press the [F/W] key momentarily.
>5. The display will disappear for a moment, then the “CLONE”
            notation will appear on the displays of both radios when the
            Clone mode is successfully activated in this step.
>6. On the Destination radio, press the MONI switch (“- -RX-
            -” will appear on the LCD).
>7. Press the PTT switch on the Source radio; “- -TX- -” will
            appear on the Source radio, and the data from this radio
            will be transferred to the other radio.
>8. If there is a problem during the cloning process, “ERROR”
            will be displayed. Check your cable connections and battery
            voltage, and try again.
>9. If the data transfer is successful, “CLONE” will reappear
            on both displays. Turn both radios off and disconnect the
            cloning cable. You can then turn the radios back on, and
            begin normal operation.
>
>Loading the radio your radio will be the Destination radio,
            Follow steps 1-5
>Then you have to be ready with Chirp to Upload to Radio.
>Press the MONI key on the radio (Step 6) 
>Then quickly press the OK button on Chirp.
>
>
>
>On 3/1/2014 6:03 PM, G T wrote:
>
>Greetings
>>I believe this may have been answered however I could not
              find a copy of the email.
>>I have a FT 60 R I'm using CHIRP cable form Amazon, it has
              a model TW-PCMYA1U  and a number PCY1004 the Prolific
              driver is 3.4.62.293.
>>Following he procedure It will read from the radio,
              populated the CHIRP spread sheet but then on the upload it
              fails. A message appears "Failed to communicate with the
              Radio. Radio did not respond" I tried it a few times as
              per the video on You tube. Do I need different driver?
>>TNX
>>73
>>W7GUS
>>
>> 
>>
>>
>>
>>
>>_______________________________________________
chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
>
>_______________________________________________
          chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>_______________________________________________
chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140302/6244ba9c/attachment.html