[chirp_users] yaesu 897

[Basil Copeland]

Jens,

I can confirm that the 2013-10-27 build WORKS, while the 2013-10-31 build
does not.

Basil


On Thu, Jan 30, 2014 at 4:42 PM, Jens J. <kd4tjx at yahoo.com> wrote:

> Looks like my change was committed ~ 2013-10-31.
> Can you verify that 2013-10-27 build works or does not work for you?
> http://trac.chirp.danplanet.com/chirp_daily/daily-20131027/
>
> -Jens
>
>   ------------------------------
>  *From:* Jens J. <kd4tjx at yahoo.com>
>
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Sent:* Thursday, January 30, 2014 4:28 PM
>
> *Subject:* Re: [chirp_users] yaesu 897
>
> FWIW, I made a global change that moved the opening of the com port for
> upload operation to _before_ the clone message is displayed.
> This was done because in my testing with FT-90, it worked fine on linux,
> but radio would not go into clone mode on windows xp.
> I suspect it had something to do with port lines (DTR/CTS, etc) or with my
> homebrew cable, but whatever it was, opening the port before displaying the
> clone instructions worked for me across platforms, and so far have not
> heard any other negative side-effects.
>
> http://chirp.danplanet.com/issues/1187#note-6
>
>
> http://chirp.danplanet.com/projects/chirp/repository/diff/chirpui/mainapp.py?rev=1c8ef954a71b&type=sbs
>
> I make this comment only in the off chance that it is somehow related to
> the issue being described here.
>
> -Jens
>
>   ------------------------------
>  *From:* Marco IZ3GME <iz3gme.marco at gmail.com>
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Sent:* Thursday, January 30, 2014 1:04 PM
> *Subject:* Re: [chirp_users] yaesu 897
>
> I tested right now with development branch and can confirm it works like
> a charm.
> But ... you know I'm on linux, is there some one that can try with windows?
>
> Tom, do we have something different in the build environment since the
> last working version?
>
> Basil, I'm quite sure is not a cable issue as we do the same echo check
> on the cable during radio download, if it works in download I don't see
> a reason for it to refuse to work for upload.
> ...mmm... can you try with linux? May be with live CD if you don't have
> a linux machine, see
> http://chirp.danplanet.com/projects/chirp/wiki/Download#Live-CD
>
> If we don't rule this out before, I'll try myself on a  windows machine
> next week.
>
> 73 de IZ3GME Marco
>
>
>
> On 01/30/2014 07:00 PM, Tom Hayward wrote:
> > On Thu, Jan 30, 2014 at 9:18 AM, Basil Copeland <blcjr2 at gmail.com>
> wrote:
> >> I found the source code.  Thanks.
> >>
> >> Well, I can understand why a code readability update shouldn't matter.
> But
> >> before dismissing the matter, shouldn't someone try to replicate my
> problem,
> >> i.e. actually try to program an FT-60 or an FT-8800 with the builds I
> >> reported problems with?  If they do, and it works for them, then I would
> >> think that narrows it to a cable issue, and we should look at what
> cables
> >> are being used successfully, versus what I'm using unsuccessfully.
> While I
> >> will not rule out a cable issue per se, I have to be jaundiced about
> blaming
> >> it on the cable since I have successfully used the FT-60 cable (FTDI)
> with
> >> the Commander software.  I purchased an FTDI cable at the same time as
> the
> >> other two, for a VX-7, but haven't tried to program it yet.  I think
> I'll
> >> try to get around to it today, and see if there are related issues.
> >>
> >> Basil
> >> KE5GAE
> >
> > Firstly, let's handle these two radios separately. I can only test one
> > at a time.
> >
> > I don't have a FT-8800 I can borrow for testing.
> >
> > The last time I borrowed an FT-60 for testing was 2013-12-18 and Chirp
> > was working fine then:
> > http://chirp.danplanet.com/issues/1273
> >
> > Tom KD7LXL
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> >
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140131/ee7609b8/attachment.html