[chirp_users] yaesu 897

Brad NK8J
Wed Jan 29 13:48:23 PST 2014


If you downloaded the .exe file just run it by clicking on it. If it is the .zip file then you have to extract the files and run setup.


Anthony Danton <ardnw at aol.com> wrote:

>Have downloaded but how do you install it ????
>
>
>
>On 29 Jan 2014, at 19:36, Marco IZ3GME wrote:
>
>> Hi Anthony
>> please update Chirp to latest daily build and it will give you all 
>> necessary instructions for clone mode .
>> 
>> Anyway, copying from source code, here they are:
>> *** DOWNLOAD FROM RADIO ***
>>             1. Turn radio off.
>>             2. Connect cable to ACC jack.
>>             3. Press and hold in the [MODE <] and [MODE >] keys while
>>                  turning the radio on ("CLONE MODE" will appear on the
>>                  display).
>>             4. After clicking OK, press the [A] key to send image.
>> *** UPLOAD TO RADIO ***
>>             1. Turn radio off.
>>             2. Connect cable to ACC jack.
>>             3. Press and hold in the [MODE <] and [MODE > keys while
>>                  turning the radio on ("CLONE MODE" will appear on the
>>                  display).
>>             4. Press the [C] key ("RX" will appear on the LCD).
>> 
>> Again please update to current daily, there are also other improvements 
>> for 897.
>> 
>> From the Baofeng image you can copy/paste memories to ft897 one or 
>> directly import all memories at once, try mouse right click then 
>> copy/paste and see 
>> http://chirp.danplanet.com/projects/chirp/wiki/Beginners_Guide#Importing-From-Another-File 
>> 
>> 
>> 73 de IZ3GME Marco
>> 
>> On 01/29/2014 08:19 PM, Anthony Danton wrote:
>>> Hi
>>> 
>>> You know how to put into clone mode ?? and can i use the file i have saved from my Baofeng to set up 2mt 70cms ?? on the 897
>>> 
>>> 
>>> cheers
>>> 
>>> 
>>> 
>>> On 29 Jan 2014, at 19:05, Marco IZ3GME wrote:
>>> 
>>>> You have to put radio in clone mode, if you update to current daily
>>>> build Chirp itself will give you all necessary instructions when needed.
>>>> 
>>>> You can download from http://trac.chirp.danplanet.com/chirp_daily/LATEST/
>>>> 
>>>> 73 de IZ3GME Marco
>>>> 
>>>> On 01/29/2014 06:37 PM, Anthony Danton wrote:
>>>>> can only get the software to show cloning and that is where it stays anyone any ideas ??
>>>>> 
>>>>> tonynw
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> 
>>>> 
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> 
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>____________________________________________________________
>High blood pressure breakthrough
>Korean Biochemist makes high blood pressure breakthrough
>http://thirdpartyoffers.juno.com/TGL3155/52e975774e9575771846mp03duc
>


More information about the chirp_users mailing list