[chirp_users] yaesu 897

[Anthony Danton]

Have downloaded but how do you install it ????



On 29 Jan 2014, at 19:36, Marco IZ3GME wrote:

> Hi Anthony
> please update Chirp to latest daily build and it will give you all 
> necessary instructions for clone mode .
> 
> Anyway, copying from source code, here they are:
> *** DOWNLOAD FROM RADIO ***
>             1. Turn radio off.
>             2. Connect cable to ACC jack.
>             3. Press and hold in the [MODE <] and [MODE >] keys while
>                  turning the radio on ("CLONE MODE" will appear on the
>                  display).
>             4. After clicking OK, press the [A] key to send image.
> *** UPLOAD TO RADIO ***
>             1. Turn radio off.
>             2. Connect cable to ACC jack.
>             3. Press and hold in the [MODE <] and [MODE > keys while
>                  turning the radio on ("CLONE MODE" will appear on the
>                  display).
>             4. Press the [C] key ("RX" will appear on the LCD).
> 
> Again please update to current daily, there are also other improvements 
> for 897.
> 
> From the Baofeng image you can copy/paste memories to ft897 one or 
> directly import all memories at once, try mouse right click then 
> copy/paste and see 
> http://chirp.danplanet.com/projects/chirp/wiki/Beginners_Guide#Importing-From-Another-File 
> 
> 
> 73 de IZ3GME Marco
> 
> On 01/29/2014 08:19 PM, Anthony Danton wrote:
>> Hi
>> 
>> You know how to put into clone mode ?? and can i use the file i have saved from my Baofeng to set up 2mt 70cms ?? on the 897
>> 
>> 
>> cheers
>> 
>> 
>> 
>> On 29 Jan 2014, at 19:05, Marco IZ3GME wrote:
>> 
>>> You have to put radio in clone mode, if you update to current daily
>>> build Chirp itself will give you all necessary instructions when needed.
>>> 
>>> You can download from http://trac.chirp.danplanet.com/chirp_daily/LATEST/
>>> 
>>> 73 de IZ3GME Marco
>>> 
>>> On 01/29/2014 06:37 PM, Anthony Danton wrote:
>>>> can only get the software to show cloning and that is where it stays anyone any ideas ??
>>>> 
>>>> tonynw
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> 
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users