[chirp_users] Tone mode

[Brad NK8J]

Have yoi tried just changing the cross mode to ->tone?  It may work for you then.

Sent from my LG Mobile

Milton Hywatt <mhywattt at yahoo.com> wrote:

>Evidently I've lost my marbles, not that I had many to lose 
>
>in the first place. The issue is decoding tone. Just want to
>open squelch only when tone is present and properly decoded. 
>
>Two public safety agencies. Standard PL toning used. 
>
>Now.. when setting up Chirp I can only get just DEC to appear
>on the display if I set the Tone Mode to Cross then the Cross
>Mode to --> Tone. Only reason to decode tone, eliminates the 
>
>repeater Morse code ID which is not transmitted with a tone encoded. 
>
>So is this all correctly done? Before I had it set to TSQL and Tone - Tone
>but it wasn't eliminating the repeater ID. So I set out for an alternative setting. 
>I have it set up similar on a Wouxun HT and when it receives a signal it can't
>decode the green activity ligh illuminates but there is no audio. So far I haven't
>heard any ID which is usually every 15 minutes or less. 
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users

____________________________________________________________
How to Sleep Like a Rock
Obey this one natural trick to fall asleep and stay asleep all night.
http://thirdpartyoffers.juno.com/TGL3131/52e0428b3ed2542892441st02vuc