[chirp_users] Baofeng UV-5R programming

[kdufour .]

good idea, I'll try


On Tue, Jan 7, 2014 at 11:39 AM, Jens J. <kd4tjx at yahoo.com> wrote:

> To add on to this,
> Try communicating with the radio using the OEM software.
> If you are able to successfully communicate with radio using the oem
> software, but are unable to using chirp, then it could be a chirp issue.
>
> If you are unable to communicate with your radio using oem software, then
> it is certainly not a chirp issue, but perhaps a cable, driver, or radio
> issue.
>
> -J
>
>   ------------------------------
>  *From:* Jim Unroe <rock.unroe at gmail.com>
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Sent:* Tuesday, January 7, 2014 10:33 AM
>
> *Subject:* Re: [chirp_users] Baofeng UV-5R programming
>
> On Tue, Jan 7, 2014 at 11:06 AM, kdufour . <kdufour at gmail.com> wrote:
>
> am running 2.0.2.1 for XP
>
>
>
> If you are running this driver on XP and getting the "radio did not
> respond" error, then there are two possibilities. Either the programming
> cable is not fully plugged into the radio (the most likely cause) or the
> programming cable is defective (possible but not as likely).
>
> Many users swear that their programming cable is fully plugged in but are
> amazed when they give it a wiggle and a firm push and notice it go in just
> a little further. See the "Errors and Error Messages" page on the
> miklor.com website.
>
> http://www.miklor.com/HT/HT-ErrorMess.php#error1
>
> Jim KC9HI
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140107/5a657c8a/attachment.html