[chirp_users] Command line possible?
Nigel Johnson, MIEEE
Tue Feb 4 15:57:51 PST 2014
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm not getting the jist of your message, Milton.
The rig is 45m away from the control head and works fine as far as operating the rig goes. I use it all the time. It is better to run a signal cable up to the roof that RG8!
I want to program it from an embedded PC in an adjacent NEMA12 cabinet, about 30cm way up in the boiler room.
The PC is controllable from the apartment five floors below using SSH, but I don't want to start x or vnc since they suck down too many cycles and kill my feed to liveATC.net.
It would be nice if it programmed via the mic jack, I could walk over to the cupboard in my apt. and hook up my laptop!
does that help to explain my situation better?
73 de Nigel ve3id
On 02/04/2014 06:20 PM, Milton Hywatt wrote:
> Too bad it has to use a data port in the back.
> My Chinese dual band Anytone AT5888UV programs
> via the RJ45 mic jack on the remote head. Not sure the serial data communications
> between the head and the body will work with a really long
> CAT5 cable. It's been debugged to be asynchronous duplex
> serial data at 19.2k baud. How many feet of cable are you using Nigel?
>
>
> ________________________________
> From: "Nigel Johnson, MIEEE" <nw.johnson at ieee.org>
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Tuesday, February 4, 2014 6:01 PM
> Subject: Re: [chirp_users] Command line possible?
>
>
> That's no problem, the control head is in my apt! :-)
>
> 73 de ve3id
>
>
> On 02/04/2014 05:45 PM, Fred Hillhouse Jr wrote:
>> The radio still needs to be put into clone mode. I think that requires
>> turning the radio on while holding buttons.
>
>
>
>
>
>> _____
>
>> From: chirp_users-bounces at intrepid.danplanet.com
>> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Milton
>> Hywatt
>> Sent: Tuesday, February 04, 2014 5:33 PM
>> To: Discussion of CHIRP
>> Subject: Re: [chirp_users] Command line possible?
>
>
>
>> What I used to run was a Dell Netbook with Windows 7 and its remote desktop
>> client.
>> I then ran CoRD remote desktop clients on my MacBook before I installed
>> Chirp and drivers
>> for Mac. So that lends to the possibility to run your laptop remote from a
>> PC in more
>> comfortable surrounding using a remote desktop client as long as both ends
>> could connect
>> to each other via hardwire and or wifi. I have my doubts about a command
>> line mode for
>> Chirp, but you really don't need it.
>
>
>
>> _____
>
>> From: "Nigel Johnson, MIEEE" <nw.johnson at ieee.org>
>> To: chirp_users at intrepid.danplanet.com
>> Sent: Tuesday, February 4, 2014 5:08 PM
>> Subject: [chirp_users] Command line possible?
>
>
>> Hi, I am a linux user, and am running my FT8900 five floors away in a boiler
>> room cabinet. SuSE 13.1 is running on a 1.2 GHz embedded PC and doesn't run
>> graphics very well. I also have aprx and a liveATC.net feed running on the
>> PC.
>
>> I'd like to be able to program it without trying to do so kneeling on the
>> concrete floor of the cramped boiler room with a laptop!
>
>> I was wondering if there is any way to run chirp from the command line?
>
>> 73 de Nigel ve3id
>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
>
>
>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
- --
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
http://nigel.homelinux.net
http://va3mcu.ham-radio-op.net
You can reach me by voice on Skype: TILBURY2591
If time travel ever will be possible, it already is. Ask me again yesterday
This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
Nigel Johnson <nw.johnson at ieee.org>
Please consider the environment when deciding if you really need to print this message
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iEYEARECAAYFAlLxfn8ACgkQrA60wVji17hhfQCdFOLOmT0gZ1LmISEulvZoMyib
GNcAniXLNbDV/ukREp42IlH/KamJ28Tm
=ODc9
-----END PGP SIGNATURE-----
More information about the chirp_users
mailing list