[chirp_users] Command line possible?

[Milton Hywatt]

Too bad it has to use a data port in the back.
My Chinese dual band Anytone AT5888UV programs
via the RJ45 mic jack on the remote head. Not sure the serial data communications
between the head and the body will work with a really long
CAT5 cable. It's been debugged to be asynchronous duplex
serial data at 19.2k baud. How many feet of cable are you using Nigel? 


________________________________
 From: "Nigel Johnson, MIEEE" <nw.johnson at ieee.org>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Sent: Tuesday, February 4, 2014 6:01 PM
Subject: Re: [chirp_users] Command line possible?
 

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

That's no problem, the control head is in my apt! :-)

73 de ve3id


On 02/04/2014 05:45 PM, Fred Hillhouse Jr wrote:
> The radio still needs to be put into clone mode. I think that requires
> turning the radio on while holding buttons.
> 
>  
> 
>  
> 
>   _____  
> 
> From: chirp_users-bounces at intrepid.danplanet.com
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Milton
> Hywatt
> Sent: Tuesday, February 04, 2014 5:33 PM
> To: Discussion of CHIRP
> Subject: Re: [chirp_users] Command line possible?
> 
>  
> 
> What I used to run was a Dell Netbook with Windows 7 and its remote desktop
> client. 
> I then ran CoRD remote desktop clients on my MacBook before I installed
> Chirp and drivers
> for Mac. So that lends to the possibility to run your laptop remote from a
> PC in more 
> comfortable surrounding using a remote desktop client as long as both ends
> could connect
> to each other via hardwire and or wifi. I have my doubts about a command
> line mode for 
> Chirp, but you really don't need it. 
> 
>  
> 
>   _____  
> 
> From: "Nigel Johnson, MIEEE" <nw.johnson at ieee.org>
> To: chirp_users at intrepid.danplanet.com 
> Sent: Tuesday, February 4, 2014 5:08 PM
> Subject: [chirp_users] Command line possible?
> 
> 
> Hi, I am a linux user, and am running my FT8900 five floors away in a boiler
> room cabinet.  SuSE 13.1 is running on a 1.2 GHz embedded PC and doesn't run
> graphics very well.  I also have aprx and a liveATC.net feed running on the
> PC.
> 
> I'd like to be able to program it without trying to do so kneeling on the
> concrete floor of the cramped boiler room with a laptop!
> 
> I was wondering if there is any way to run chirp from the command line? 
> 
> 73 de Nigel ve3id
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
> 
> 
> 
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 

- -- 
Nigel Johnson
MSc., MIEEE
VE3ID/G4AJQ/VA3MCU

Amateur Radio, the origin of the open-source concept!

http://nigel.homelinux.net
http://va3mcu.ham-radio-op.net

You can reach me by voice on Skype:  TILBURY2591

If time travel ever will be possible, it already is. Ask me again yesterday

This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
   Nigel Johnson <nw.johnson at ieee.org>

    
Please consider the environment when deciding if you really need to print this message



-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iEYEARECAAYFAlLxcVoACgkQrA60wVji17jABQCdG3N5jYb3FJld5+LzgRtUdP/e
3ksAoIt+SJNr89/d/J/9zuVAEpkhwHEz
=NoFB

-----END PGP SIGNATURE-----
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140204/c022c90d/attachment.html