[chirp_users] Download & execute

[Tom Hayward]

On Oct 6, 2013 8:27 AM, "John LaMartina" <JohnLa at usa.net> wrote:
> For CHIRP to recognize what radio you have you need to Download Image
from Radio to CHIRP to set up the initial image.
>
> Now you can start entering data for your radio.
>
> When finished, then you can upload the new template image to your radio.
>
> Obviously you can’t do this part until your cable arrives.

This is only half true. The recommended work flow is to enter all of your
frequencies into a master CSV that you can import into all your radios. He
can get started with this without a radio. Then when he gets his radio and
cable, all he has to do is copy and paste the channels over, no retyping.

Save the master CSV in the stock_configs folder to make it easy to find
next time.

Tom KD7LXL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131006/25982318/attachment.html