[chirp_users] FT-60r not receiving "on frequency"

[Phil - w2lie]

Hi All,
I'm trying to write to a FT-60r using the latest stable build and the 
latest dev build (2013-11-21).   Using both versions of software, it 
seems that the radio is failing to receive on the correct frequency, 
even though Chirp shows the correct data was entered.

Example:  Saving 477.3875 with a step of 12.5khz is being received by 
the radio as 477.380.   I verified this by changing the memory settings 
from Alpha to Freq.  A frequency of 477.380 is displayed in that memory 
location.

BUT - the strange thing is, if I read the configuration back via Chirp, 
it reads that 477.3875 was actually programmed into the radio in that 
memory location!

I'm just picking this single frequency as an example, but it seems that 
every frequency I programmed into the radio is "off".

If anyone can help me out here, that would be great!

Thanks again
Phil / w2lie