[chirp_users] cannot start chirp properly

[Marty Hartwell]

Hi

That is a default condition when the program is first installed. The 
window is telling
you that error reporting is turned on. You can turn off error reporting 
by clicking on
help and clicking the "Report Statistics" I think.  However I don't 
think it bothers
the regular operation. To download/upload to rig click on radio for more 
options.
When you click to upload/download you will be asked for Comm Port number.
You may have to look in your device manager to find out which one is 
being assigned
if you are using an USB to Serial adapter, if you have one serial port 
it would be best
to confirm which one you think it is and how it is shown. On my Vista 
system it is
shown as COMM3 and that is how it needs to be put in the port of Chirp, 
on my XP
system if auto fills that information, If I remember right.

Hope this helps some.

Marty kd8bj
On 11/23/2013 12:50 AM, Amnon Zohar wrote:
>
> i installed both the reg and the daily version on both xp and 8 
> windows platform.
> i changed the cable driver to the old 3.2.0.0 version (programming 
> works fine with the vip software)
> but all i got was a widow shown on the attatched file
> wheb i click ok the window disappear and nothing happens!
> how do i start using chirp???
>
> -- 
> Amnon
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users