[chirp_users] Radio still does not respond

[John LaMartina]

Madison,

When the cable is plugged in, the driver is loaded to that com port.

If you change com ports, the correct driver needs to be reloaded to the new port.

I believe that’s what you are experiencing.

 

John    K3NXU

 

 

 

 <http://www.miklor.com/amazon> amazon

 

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of km9m-zig at comcast.net
Sent: Wednesday, May 29, 2013 5:25 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Radio still does not respond

 

try plugging the programming cable into a different usb port.
I'm pretty sure this was my error problem, i use an older dell laptop.

I attempted to use the usb ports on the side, no joy.

for S & G's I plugged the cable into one of the usb ports on the back, and bingo..

Dell Laptop running XP-SP3.

GL and 73,

Zig - KM9M

  _____  

From: "Madison Jones" <w5mj at hal-pc.org>
To: "chirp users" <chirp_users at intrepid.danplanet.com>
Sent: Wednesday, May 29, 2013 10:38:32 AM
Subject: [chirp_users] Radio still does not respond




To review my problem: Win7, Prolific 3.2.0.0 7/31/2007 [installed and reinstalled and reinstalled] on com 3, CHIRP 0.3.1, plug end filed down and pushed in HARD, and still get “radio did not respond” when I attempt to download from the radio.  The miklor.com page has no suggestions for this error msg other than to file down the cable.  Anything else in anyone’s bag of tricks?

 

Regards,

 

Madison Jones

W5MJ

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130529/95118901/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3541 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130529/95118901/attachment.gif