[chirp_users] Elecraft Support

[Marty Hartwell]

Hi

I used to have a K2 and it used a lot of the Kenwood radio
control commands, by that I mean, then we used kenwood ????
and the rig time. Sorry I can't remember what ???? was.
It may be that if someone donated the use of Elcraft it wouldn't
take long to get Chirp to work with them.

Marty kd8bj

On 03/24/2013 05:56 PM, John Leahy wrote:
> Jon,
> These kind folks at CHIRP need a radio for some period of time to
> download the files, study them, make changes to their program and then
> test the results.  Since they do this all by donation there is no way
> that they can afford to purchase one of everything and then all of the
> revisions of each radio. As long as radios are programmed in a non
> defined standard all they can do is "reverse engineer" a typical unit.
> If you and enough others would like the Elecraft line included somebody
> will have to step up and ship a unit on a short vacation.
> 73,
> JL
> *From:* Jon Moody <jmoodysr at gmail.com>
> *To:* chirp_users at intrepid.danplanet.com
> *Sent:* Sunday, March 24, 2013 6:31 PM
> *Subject:* [chirp_users] Elecraft Support
>
> I am almost afraid to ask but looking through the previous years mailing
> lists... I didn't see any discussion of this.   Also looking at the
> roadmap did not see any mention either.  So does Chirp have any plans on
> supporting the Elecraft products in the future ?  Such as K3,  KX3 or K2 ?
>
> --
> Thanks
> Jon
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>