[chirp_users] baufeng uv-5r

[Bill Gabbard]

Hap,
Turn radio OFF, then press the "3" key & hold, turn radio on while holding the "3" down,you should see a BFBXXX where XXX is a number like BFB397.


73s,

Bill

  ----- Original Message ----- 
  From: Hap Hatch 
  To: 'Discussion of CHIRP' 
  Sent: Friday, March 22, 2013 2:02 PM
  Subject: Re: [chirp_users] baufeng uv-5r


  3.0

   

  From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
  Sent: Friday, March 22, 2013 9:19 AM
  To: Discussion of CHIRP
  Subject: Re: [chirp_users] baufeng uv-5r

   

  What version of CHIRP are you using? Can you attach an image downloaded from your radio?

  Jim On Fri, Mar 22, 2013 at 12:11 PM, Hap Hatch <HapHatch at verizon.net> wrote:

  I have had a problem with a new uv-5r.  I have programmed two other uv-5r radios in the past with no problems at all but this new one gives me a warning as follows---"Upload finished, but the 'Other Settings' could not be sent because the firmware version of the image does not match that of the radio"

  Can you help?  Thanks.  Hap Hatch  k6hap


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users

   



------------------------------------------------------------------------------


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130322/89698f36/attachment.html